Download Print this page

Raider Pro RDP-SHM20 SOLO User Manual page 12

Cordless mixer li-ion

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 9
12
www.raider.bg
11. Corrective actions in case of damage
(1) The starter switch is on but the engine is not
running.
- The wires in the nest are loose.
- The starter switch is damaged.
- Replace the starter switch.
(2) The starter switch is on but there are unusual
noises, the engine does not work or it works very
slowly.
- The breaker breaks down.
Replace the Start Breaker.
- Stacked component.
Check and repair the power tool.
- Too much load, as a result of which the engine is
boxing.
Use less pressure during task execution.
(3) Dvigatelyat zagryava.
- V dvigatelya sa vlezli chuzhdi veshtestva.
Ot·stranete chuzhdite veshtestva.
- Lipsa ili zamŭrsena gres.
Gresiraĭte ili ya zamenete.
- Natovarvaneto e tvŭrde visoko
Izpolzvaĭte po-malko natisk po vreme na zadachata
(4) Chesti ili silni iskri na komutatora.
- Kŭso sŭedinenie na kotvata.
Zamenete kotvata.
- Vŭglerodnite chetki sa iznoseni ili zadrŭsteni.
Proverete vŭglerodnite chetki.
- Gruba rabota na komutatora.
Pochistete povŭrkhnostta na komutatora ili go
zazemete.
Показване на още
486/5000
(3) The engine heats up.
- There are foreign substances in the engine.
Remove foreign substances.
- No grease or dirt.
Grease or replace it.
- The load is too high
Use less pressure during the task
(4) Frequent or strong sparks on the switch.
- Anchor short circuit.
Replace anchor.
- Carbon brushes are worn or clogged.
Check the carbon brushes.
- Rough operation on the switch.
Clean the surface of the switch or ground it.
12. Environmental protection.
In order to protect the environment, the power
tool, accessories and packaging must be suitably
processed for the re-use of the raw materials
contained therein.
Do not dispose of power tools in household waste!
According to Directive 2012/19 / EC on end-of-life
electrical and electronic devices and the validation
and as a national law, power tools that can no longer
be used must be separately collected and subjected
to an appropriate processing for recovery of their
contents valuable secondary raw materials.

Advertisement

loading