Product Safety - Steel City 35-215S3 Owner's Manual

1. Do not clean the table of chips or dust with hands. Blow
off with low-pressure air.
2. Do not operate machine while the gear cover is open.
3. Be sure the knives of the cutter head are correct and all
hex screws are secured tightly before use.

ProDUCT sAFeTY

4. Avoid possible reject: do not lower your head down at
5. Avoid possible rejects: inspect the board for cracks and
Page 6
the level of the cutter head when it is running.
other aspects which can cause rejection.