Table Of Contents; Introduction; Table Of Contents; Product Specifications - Steel City 35-215S3 Owner's Manual

INTRODUCTION .......................................................................................................... 3
TABLE OF CONTENTS................................................................................................ 3
PRODUCT SPECIFICATIONS ..................................................................................... 3
SAFETY........................................................................................................................ 4
PRODUCT SAFETY..................................................................................................... 6
ELECTRICAL AND GROUNDING INSTRUCTIONS ................................................... 7
UNPACKING AND INVENTORY .................................................................................. 8
FEATURE IDENTIFICATION........................................................................................ 9
ASSEMBLY ................................................................................................................ 10
ADJUSTMENTS ......................................................................................................... 12
MAINTENANCE ......................................................................................................... 17
PARTS LIST ............................................................................................................... 19
This user manual is intended for use by anyone working with this machine. It should be kept available for
immediate reference so that all operations can be performed with maximum efficiency and safety. Do not attempt
to perform maintenance or operate this machine until you have read and understand the information contained
in this manual.
The drawings, illustrations, photographs, and specifications in this user manual represent your machine at time
of print. However, changes may be made to your machine or this manual at any time with no obligation to
Steel City.
Motor
Cutter head type
Cutter head speed
Planning width
Max. depth of cut
Min/Max stock thickness
Min. stock length
Feed rate (2)
Main table dimensions
Table length with extensions
Dust port
Approx. weight

TABLe oF ConTenTs

InTroDUCTIon

ProDUCT sPeCIFICATIons

Page 3
35-215S3
3 HP - 230V - 1 ph - 15A
3 straight knives
5000 RPM
15" (380 mm)
1/8" (3 mm)
3/16" to 6" (5 to 150 mm)
6" (150 mm)
16 / 20 ft/min. (4,9 / 6 m/min.)
15" x 20" (380 x 508 mm)
48" (1219 mm)
1 x Ø4" (1 x Ø100 mm)
248 kg (545 lb)