Table of Contents
Advertisement
8
www.raider.bg
EN
1. General guidelines for safe operation.
Read all instructions carefully. Failure of the nature following instructions can cause electric shock, fire and / or severe injuries.
Keep these instructions in a safe place.
1.1. Safety in the workplace.
1.1.1. Keep your workplace clean and well lit. Disarray and poor lighting may contribute to the occurrence of an accident.
1.1.2. Do not operate in an environment where the cordless screwdriver with an increased risk of an explosion in the vicinity of flammable
liquids, gases or powders.
During operation of the cordless screwdriver can be separated sparks that can ignite powders or fumes.
1.1.3. Keep children and bystanders at a safe distance while working with the cordless screwdriver.
If your attention is diverted, you may lose control over the cordless screwdriver.
1.2. Safety when working with electricity.
1.2.1. Plug of the cordless screwdriver must be suitable for contact. In no case is allowed to modify the structure of the plug. When
working with electrical zero, do not use plug adapters.
Using original plugs and sockets reduces the risk of electric shock.
1.2.2. Protect your cordless screwdriver from rain and moisture.
Penetration of water into the cordless screwdriver increases the risk of electric shock.
1.3. Safe way of working.
1.3.1. Be concentrated, watch their actions carefully and act cautiously and prudently. Do not use the cordless screwdriver, when you
are tired or under the influence of drugs, alcohol or narcotic drugs.
A moment of distraction at work striking screwdriver may have the effect of extremely serious injuries.
1.3.2. Work with protective work clothing and always with safety glasses.
Wearing Suitable for screwdrivering shock and the activities of personal protective equipment, such as respiratory masks, healthy, tightly
closed shoes grapple with a stable, protective helmet and silencers (hearing protectors), reduces the risk of accident.
1.3.3. Avoid the danger of switch on the cordless screwdriver inadvertently. If, when you carry the cordless screwdriver, keep your finger
on the trigger switch, there is the risk of accident.
1.3.4. Avoid unnatural positions of the body. Work in a stable position of the body at any time and keep the balance. So you can control
the cordless screwdriver better and safer if unexpected situations arise.
1.3.5. Work with appropriate clothing. Do not operate with loose clothing or ornaments. Keep your hair, clothes and gloves at a safe
distance from rotating units of the cordless screwdriver. Robes, jewelry, long hair can be caught and carried away by chuck.
1.4. Care to cordless screwdriver.
1.4.1. Do not overload the cordless screwdriver. Use only the cordless screwdriver in accordance with its intended purpose. You will
operate better and safer when using the appropriate cordless screwdriver manufacturer in the specified range of load.
1.4.2. Keep cordless screwdriver in places where they could not be reached by children. Do not let it be used by persons who are not
familiar with how to work with it and have not read those instructions. When in the hands of inexperienced users, the cordless screwdriver
can be dangerous.
1.4.3. Keep your cordless screwdriver carefully. Check whether the mobile units operate impeccable, whether it spells, if there is broken
or damaged item which distort or alter the functions of the cordless screwdriver. Before using the cordless screwdriver, make sure that the
damaged parts to be repaired. Many accidents are caused by poorly maintained power tools and appliances.
1.4.4. Keep your cutting tools well sharpened and always clean. Properly maintained cutting tools with sharp edges have less resistance
and working with them easier.
1.4.5. Use the cordless screwdriver, attachment, working tools, etc., according to the manufacturer's instructions. In doing so must
comply with specific operating conditions and operations to perform. Using a cordless screwdriver than those provided by the manufacturer
applications increases the risk of accidents.
1.5. Instructions for safe handling, specific for your purchased cordless screwdriver.
Loss of control over power tool could lead to the occurrence of accidents.
1.5.1. Do not use additional devices which are not recommended by the manufacturer for this particular power tool. The fact that you
can attach to specified device or machine working tool does not ensure safe working with him.
1.5.2. Never put your hands near the rotary working tools.
1.5.3. If you perform activities which threaten to fall working tool of hidden wires under tension, hold power tool only electric insulated
handles. When entering the working tool in contact with the wires under tension, it is transmitted through the metal details of the cordless
screwdriver and this may lead to electric shock.
1.5.4. Use appropriate instruments to find any hidden beneath the surface pipelines, or contact the appropriate local supply company.
Into contact with the wires under tension can cause fire or electric shock. Pipeline damage can lead to explosion. Deterioration of water has
the effect of major material damage and may cause electric shock.
1.5.5. Provide workpiece.
Advertisement
Table of Contents
