dynabook PORTEGE X30W-J Maintenance Manual
  1. Manuals
  2. Brands
  3. dynabook Manuals
  4. Laptop
  5. PORTEGE X30W-J
  6. Maintenance manual

dynabook PORTEGE X30W-J Maintenance Manual

Hide thumbs Also See for PORTEGE X30W-J:
Table of Contents

Advertisement

Quick Links

Dynabook Personal Computer
Rev.00
Oct. 2020
Rev.01
Mar. 2021
PORTÉGÉ X30W-J
dynabook V*/VZ*/VC* Series
Maintenance Manual
First issue
Addition of 5G/LTE information
Dynabook Inc.
File Number (960-941)
[CONFIDENTIAL]

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PORTEGE X30W-J and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for dynabook PORTEGE X30W-J

Summary of Contents for dynabook PORTEGE X30W-J

  • Page 1 Dynabook Personal Computer PORTÉGÉ X30W-J dynabook V*/VZ*/VC* Series Maintenance Manual Rev.00 Oct. 2020 First issue Rev.01 Mar. 2021 Addition of 5G/LTE information Dynabook Inc. File Number (960-941) [CONFIDENTIAL]...
  • Page 2 Copyright © 2021 Dynabook Inc. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Dynabook Inc. No patent liability is assumed with respect to the use of the information contained herein.
  • Page 3  If you replace the battery pack or RTC battery, be sure to use only the same model battery or an equivalent battery recommended by Toshiba. Installation of the wrong battery can cause the battery to explode. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 4 The appendices describe the following:  Handling the LCD module  Board layout  Pin assignments  Keyboard Matrix  Key layout  Wiring diagrams  BIOS rewrite procedures  EC/KBC rewrite procedures  Reliability [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 5 Text that you are instructed to type in is shown in the boldface type below: DISKCOPY A: B: The display Text generated by the computer that appears on its display is presented in the type face below: Format complete System transferred PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 6 1.5 Web camera ........................1-16 1.6 Power Supply ........................1-17 1.7 Batteries ........................1-18 1.8 AC Adapter ........................1-20 1.9 Stylus pen ........................1-21 1.10 USB Type-C Adapter ....................1-24 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 7: Table Of Contents

    2.17 Fingerprint sensor Troubleshooting ................2-40 2.18 Web camera (Front/Rear) Troubleshooting ............... 2-43 2.19 HDMI port Troubleshooting ..................2-44 2.20 USB Type-C adapter Troubleshooting ..............2-46 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 8 3.13 Wireless Module Test ....................... 3-22 3.14 5G/LTE Test........................3-24 3.15 Sound Test......................... 3-25 3.16 SETUP ..........................3-26 3.17 Sensor calibration tool ...................... 3-34 viii [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 9 4.14 W-LAN ANTENNA ......................4-57 4.15 LID BOARD ........................4-62 4.16 REAR CAMERA MODULE .................... 4-64 4.17 LCD FAT ASSY/COVER ASSY ..................4-66 4.18 KEYBOARD ........................4-68 4.19 LCD/CAMERA MODULE ....................4-72 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 10 Appendix E Key Layout ..................... E-1 Appendix F Wiring Diagrams .................... F-1 Appendix G BIOS rewrite Procedures ................G-1 Appendix H EC/KBC rewrite Procedures ................. H-1 Appendix I Reliability ......................I-1 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 11 Chapter 1 Hardware Overview...
  • Page 12 1 Hardware Overview 1-ii [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 13 Power Supply ......................1-17 Batteries ........................1-18 1.7.1 Main Battery ..................1-18 1.7.2 Battery Charging Control ..............1-19 AC Adapter ......................1-20 Stylus pen ......................... 1-21 1.10 USB Type-C Adapter ....................1-24 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 1-iii...
  • Page 14 Table 1-7 Time required for charges .................. 1-19 Table 1-8 Data preservation time ..................1-19 Table 1-9 AC adapter specifications ................... 1-20 Table 1-10 Stylus pen specifications .................. 1-21 Table 1-11 USB Type-C adapter specifications ..............1-24 1-iv [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 15: Figure 1-1 Appearance And Each Unit Position

    This model belongs to a convertible type PC and realizes 3 styles, clamshell, flat and tablet, at use. The following shows each unit position and system unit configuration of this model.  Front view Figure 1-1 Appearance and each unit position (1) PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 16 1 Hardware Overview  Back view  Left side  Right side Figure 1-1 Appearance and each unit position (2) [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 17 1 Hardware Overview  Underside Figure 1-1 Appearance and each unit position (3) PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...

  • Page 18: Figure 1-2 Board Connection Diagram

    1 Hardware Overview Figure 1-2 Board connection diagram [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 19: Figure 1-3 System Block Diagram

    1 Hardware Overview Figure 1-3 System block diagram PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 20 The keyboard is the frameless keyboard in B5-size. The back light is supported.  Touch Pad (Click pad) A click pad supporting gesture control function is mounted in the palm rest. [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 21 Power-off&Charge function.  Battery As a main battery, a rechargeable Lithium-Ion (Polymer) battery pack is mounted. A part of this battery pack is used for RTC battery function.  Sensors and others PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 22 1 Hardware Overview  3D Acceleration sensor  Finger print sensor: on SecurePad (BTO)  IR Camera (Face Recognition Sensor) (BTO)  GPS (for 5G/LTE models (BTO))  Gyro sensor  EC/KBC: MEC1703 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 23: Table 1-1 M.2 Pcie Ssd Specifications

    512GB Outline Width (mm) 22.00±0.15 Height (mm) 2.25 Max Length (mm) 80.00±0.15 Weight (g) 8.0 Max. Data transfer speed Maximum Data 1,800MB/s 2,000MB/s 2,000MB/s Read Maximum Data 600MB/s 1,200MB/s 1,600MB/s Write PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 24 (Intel® Optane™ Memory H10 Series) Part code G8BC000CB510 G8BC000CB1A0 Capacity 32GB+512GB 32GB+1TB Outline Width (mm) Height (mm) Length (mm) Weight (g) Data transfer speed Maximum Data Read Maximum Data Write 1-10 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 25 Width (mm) 22.00±0.15 Height (mm) 2.38 (Max) Length (mm) 80.0±0.15 Weight (g) 6.0g (Max) Data transfer speed Maximum Data Read 2,000MB/s 2,050MB/s 2,200MB/s (Sequential) Maximum Data Write 1,000MB/s 1,000MB/s 1,200MB/s (Sequential) PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 1-11...

  • Page 26: Figure 1-4 Us Keyboard Layout

    The followings show the layout of the US keyboard and specifications of UK/JP/US keyboards. As for the layout of UK/JP keyboards, see Appendix E. As for the key matrix, see Appendix D. Figure 1-4 US keyboard layout 1-12 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 27: Table 1-2 Keyboard Specifications

    Part code 271.6(L) x 101.8(W) x 3.8±0.2(H)(mm) Outline 54.0±1.0g Weight 19 mm (X direction),18 mm (Y direction) (mm) Key Pitch 1.5±0.2 (mm) keystroke Number of keys Yes (White) Backlight AccuPoint PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 1-13...
  • Page 28 Part code 271.6(L) x 101.8(W) x 3.8±0.2(H)(mm) Outline 54.0±1.0g Weight 19 mm (X direction),18 mm (Y direction) (mm) Key Pitch 1.5±0.2 (mm) keystroke Number of keys Yes (Red) Backlight AccuPoint 1-14 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 29: Figure 1-5 Lcd Module

    Number of Dot 1920(H) ×1080(V) (1 pixel = R+G+B dot) Active display area [mm] 293.76(H) × 165.24(V) Dot pitch [mm] 0.153(H)×0.153(V) Pixel configuration R.G.B. Vertical Stripe Weight [g] 170 (max) PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 1-15...

  • Page 30: Table 1-4 Web Camera Module Specifications (Front)

    Chicony G9BC0006G110 8M AF Size [mm] (Max) 26.4 × 24.12 × 4.1mm Weight [g] 0.67 ± 0.03 Image transfer rate 3,264 x 2,448: 30fps (fps) (Max) Focus Distance 10 cm～infinity 1-16 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 31 5. Turns the power supply on and off. 6. Provides more accurate detection of a low battery. 7. Calculates the remaining battery capacity. 8. Controls the transmission of the status signal of the main battery. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 1-17...

  • Page 32: Table 1-6 Battery Specifications

    The main battery pack is the computer’s main power source when the AC adaptor is not attached. The main battery maintains the state of the computer when the computer enters in sleep mode. 1-18 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 33: Table 1-7 Time Required For Charges

    When turning off the power in being charged fully, the preservation time is as follows. Table 1-8 Data preservation time Preservation time Type of battery Sleep Shutdown/Hibernation Main battery (4Cell，53Wh) About 5 days About 50 days PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 1-19...

  • Page 34: Table 1-9 Ac Adapter Specifications

    G71C000LR210 (2-pin) G71C000LS210 (3-pin) Power Input voltage 100V/240V Input frequency 50Hz to 60Hz Output voltage Output current 3.25A Dimension (mm) 63(W) x 63(L) x 28(H) (Typ.) Cable length (mm) 1800(±50) 1-20 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 35: Table 1-10 Stylus Pen Specifications

    Up to 4,096 level resolution (depends on touch IC’s F/W setting) Returning time 5±30% from sleep [ms] Shifting time to Approximately 10 minutes sleep Length (mm) 127.2 Weight(g) 6.4±0.5 (excluding battery) PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 1-21...
  • Page 36 AAAA dry cell AAAA dry cell Before you handle the battery, read carefully the following instructions to avoid potential hazards that could cause bodily injury, property damage, or damage the product 1-22 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 37 Never leave the battery in the product for a long time Never leave the battery in the product for a long time if it is not in use. Failure to do so could possibly damage your product. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 1-23...

  • Page 38: Table 1-11 Usb Type-C Adapter Specifications

    The following table shows the USB Type-C adapter specifications. Table 1-11 USB Type-C adapter specifications Item Specifications Maker Goodway Appearance USB-C TO VGA/LAN ADAPTER Specifications G83C000LP110 Parts code VGA/LAN/USB Type-C port (Power Delivery Charging) Functions 1-24 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 39: Troubleshooting Procedures

    Chapter 2 Troubleshooting Procedures...
  • Page 40 2.8.2 Procedure 2 Connector Check ............2-24 2.8.3 Procedure 3 Replacement Check ............2-25 Display (LCD, Touch panel) Troubleshooting ............. 2-26 2.9.1 Procedure 1 Check on Windows OS ..........2-26 2-ii [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 41 Procedure 1 Setting Windows sign-in password ........ 2-40 2.17.2 Procedure 2 Registration of Pin and fingerprint ......... 2-40 2.17.3 Procedure 3 Authentication of fingerprint .......... 2-41 2.17.4 Procedure 4 Connector Check and Replacement Check ....2-42 2-iii PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 42 LAN port ..................... 2-48 Figures Figure 2-1 Troubleshooting flowchart .................. 2-4 Tables Table 2-1 Power indicator ....................2-9 Table 2-2 DC IN/Battery indicator ................. 2-9 Table 2-3 Error code ....................2-12 2-iv [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 43: Troubleshooting

    15. Fingerprint sensor 16. Web camera 17. HDMI port 18. USB Type-C adapter The Test Program operations are described in Chapter 3. Detailed procedures for replacement are described in Chapter 4. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 44 There are following two types of connections in the figure of board and module connection in this chapter. (1) Cable connection is described with lines in the figure. (2) Pin connection is described with arrow in the figure. < Sample figure of connection > [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 45: Troubleshooting Flowchart

     Make sure that Toshiba Windows is installed on the hard disk. Non-Windows operating systems can cause the computer to malfunction.  Make sure all the optional equipment is removed from the computer. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 46 Perform the Display Troubleshooting Procedures in section 2.9. If the “Password=” message appears, type the password. Perform the SSD Is Windows OS loaded? Troubleshooting Procedures in section 2.6. Figure 2-1 Troubleshooting flowchart (1/2) [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 47 Confirm on which test the error Is an error detected during was detected and perform the the running test? appropriate procedures. System can work without problem. Figure 2-1 Troubleshooting flowchart (2/2) PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 48 13. If an error is detected on the Sound, perform the Sound Troubleshooting Procedures in Section 2.15. 14. If an error is detected on the Memory media (SD Card) Slot, perform the Memory media (SD Card) Slot Troubleshooting Procedures in Section 2.16. [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 49 17. If a malfunction is detected on the HDMI port, perform the HDMI port Troubleshooting Procedures in Section 2.19. 18. If a malfunction is detected on the USB Type-C adapter, perform the USB Type-C Adapter Troubleshooting Procedures in Section 2.20. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...

  • Page 50: Power Supply Troubleshooting

    Procedures as instructed. The procedures described in this section are: Procedure 1: Power Status Check Procedure 2: Error Code Check Procedure 3: Connection Check Procedure 4: Charging Check Procedure 5: Replacement Check [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 51 The AC adaptor must be connected in order to recharge the battery. No light Indicates the AC adaptor is not connected In the case of other than the above, there might be a problem on the battery. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 52 Use a supplied AC adapter, G71C000LR210 (2-pin) or G71C000LS210 (3-pin). ･ Use only the Type-C adapter comes with the PC or Dynabook authorized adapter. When the DC IN/Battery indicator is still flashing, go to Procedure 2. When the DC IN/Battery indicator is turned off, go to Procedure 3.
  • Page 53 On for half second Interval between data bits Off for half second The error code begins with the least significant digit. Example: Error code A2h (Error codes are given in hexadecimal format.) 2-11 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 54 PCNFBV signal deasserted when BVON signal is output) asserted B system power supply OFF Power off steady state & steady output error (With PCNFBV signal asserted when BVON signal is output) deasserted. 2-12 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 55 5G3VON signal asserted Steady-state output error at Power off steady state & power off of 5G power supply When the 5G3VPG signal is asserted with the (With output) 5G3VON signal deasserted 2-13 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 56 To disassemble the computer, follow the steps described in Chapter 4, Replacement Procedures. Check 1 AC adapter may be faulty. Replace the AC adapter with a new one. If the problem still occurs, perform Check 2. 2-14 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 57 Battery pack may be faulty. Replace it with a new one. If the problem still occurs, perform Check 4. Check 4 System board may be faulty. Replace it with a new one. 2-15 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...

  • Page 58: System Board Troubleshooting

    Procedure 1 and continue with the other procedures as instructed. The procedures described in this section are: Procedure 1: Message Check Procedure 2: Diagnostic Test Program Execution Check Procedure 3: Replacement Check 2-16 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 59: Procedure 1 Message Check

    F2 to display the BIOS setup screen. Set the correct boot device and repeat Procedure 1. If any error occurs or any device is not installed, go to Procedure 2. 2-17 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...

  • Page 60: Procedure 2 Diagnostic Test Program Execution Check

    Before exchanging a system board, write down the DMI information, and after the exchange, register the DMI information to the new system board according to Chapter 3. At that time, update the BIOS and EC/KBC to the latest ones. 2-18 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 61: Usb Troubleshooting

    2.5.2 Procedure 2 Replacement Check of USB unit Check 1 USB unit may be faulty. Replace it with a new one. If the problem still occurs, go to Procedure 3. 2-19 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 62 Disassemble the computer following the steps described in Chapter 4, Replacement Procedures, and replace the system board with a new one. System board CN4800 Type-C connector CN4821 USB unit Type-C connector CN4850 Type-A connector 2-20 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 63: Ssd Troubleshooting

    Make sure the M.2 SSD is connected firmly to the connector on the system board. System board CN1910 If the connection is loose, reconnect it firmly and repeat Procedure 1. If there is still an error, go to Procedure 3. 2-21 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...

  • Page 64: Procedure 3 Replacement Check

    Chapter 4, Replacement Procedures and check the operation. If the problem still exists, perform Check 2. Check 2 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. 2-22 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 65: Keyboard Troubleshooting

    Chapter 4, Replacement Procedures. If the problem still occurs, perform Check 3. Check 3 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. 2-23 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...

  • Page 66: Touch Pad (Click Pad) Troubleshooting

    CN9510 Click pad I/F System board Touch Pad CN9550 KB fingerprint sensor I/F FP FFC (Only for Secure pad) If the problem still occurs, go to Procedure 3. 2-24 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 67: Procedure 3 Replacement Check

    Chapter 4, Replacement Procedures. If the problem still occurs, perform Check 2. Check 2 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. 2-25 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...

  • Page 68: Display (Lcd, Touch Panel) Troubleshooting

    Diagnostics, for more information on how to perform the test program. If any error occurs during the test program, go to Procedure 3. If not, both the LCD should work properly. 2-26 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 69 If the problem still exists, perform Check 4 Check 4 The display controller on the system board may be damaged. Replace the system board with a new one. 2-27 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...

  • Page 70: Optical Disk Drive Troubleshooting: Not Used

    Chapter 4, Replacement Procedures. If the problem still exists, perform Check 3. Check 3 System board may be faulty. Replace it with new one following the instructions in Chapter 4, Replacement Procedure. 2-28 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 71: Lan Troubleshooting: Not Used

    USB board/LTE board or USB FPC may be faulty. Replace it with a new one. If the problem still occurs, perform Check 7. Check 7 System board may be faulty. Replace it with a new one following the instruction in Chapter 4, Replacement Procedure. 2-29 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...

  • Page 72: Wireless Lan +Bluetooth Troubleshooting

    If the cables are not connected properly, connect them firmly to the correct position and perform Procedure 1. If the problem still occurs, go to the procedure 3. 2-30 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 73: Procedure 3 Replacement Check

    Check 2 Wireless LAN/Bluetooth Combo module or System board may be faulty. Since the Combo module is installed on the system board directly, replace the system board with a new one. 2-31 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...

  • Page 74: Lte Troubleshooting

    This procedure checks if the 5G or LTE module can be found on the Windows application. Refer to Chapter 3 for more information about that. If any problem is found on that check, perform Procedure 2. 2-32 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 75 If the problem still exists, 5G/LTE module, antenna or system board may be faulty. Refer to Chapter 4, Replacement Procedures, for instructions on how to disassemble the computer and then perform the following checks: 2-33 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 76 Antennas may be defective or damaged. Replace them with new ones and perform Procedure 1 again. If the problem still exists, perform Check 3. Check 3 System board may be defective or damaged. Replace it with a new one. 2-34 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 77: Wigig Troubleshooting: Not Used

    Make sure that WiGig module is firmly connected to the connector on the system board. If the connection is loose, connect it firmly and perform Procedure 1. If the problem still occurs, perform Check 2. 2-35 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 78 WiGig antenna may be faulty. Replace it with a new one. If the problem still occurs, perform Check 3. Check 3 The system board may be faulty. Replace it with a new one. 2-36 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 79: Sound Troubleshooting

     If built-in microphone does not work properly, reconnect it surely following the steps in Chapter 4, Replacement Procedures. If there is still problem, perform Check 3 of Procedure 3. 2-37 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 80 Replacement Procedures. If the problem still occurs, perform Check 4. Check 4 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. 2-38 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 81: Memory Media (Sd Card) Slot Troubleshooting

    Memory media (micro SD Card) may be faulty. Replace it with a new one. If the problem continues, perform Check 3. Check 3 System board may be faulty. Replace it with a new one following the step in Chapter 4 Replacement Procedures. 2-39 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...

  • Page 82: Fingerprint Sensor Troubleshooting

    To use the fingerprint functions, registration of your fingers on “Windows Hello” after setting the Windows sign-in password and PIN. 2.17.2 Procedure 2 Registration of Pin and fingerprint As for the registration of the fingerprint information, refer to the User’s manual. 2-40 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 83: Procedure 3 Authentication Of Fingerprint

    If you fail this authentication continually five times, you cannot use the fingerprint authentication. In that case, type the password to sign in to Windows. If you want to type the password on the finger print authentication screen, press BACKSPACE. 2-41 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 84 The Secure pad may be faulty. Replace it with a new one. If the problem still occurs, perform Check 4. Check 4 The system board may be faulty. Replace it with a new one. 2-42 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 85: Web Camera (Front/Rear) Troubleshooting

    Procedure 1 again. If the problem still occurs, perform Check 3 Check 3 System board may be faulty. Replace it with a new one. 2-43 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...

  • Page 86: Hdmi Port Troubleshooting

    Check the HDMI port condition following the steps below. For details of each operation, refer to User’s manual. 1. Connecting to the computer 2. Switching the sound output from computer’s speakers to TV 3. Switching the image output from computer’s screen to TV 2-44 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 87: Procedure 2 Connector Check And Replacement Check

    Check 5. Check 5 The system board may be damaged. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures, and replace it with a new one. 2-45 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...

  • Page 88: Usb Type-C Adapter Troubleshooting

    Check 2. Check 2 USB Type-C adapter may be faulty. Replace it with a new one. If the problem still exists, check the PC condition. 2-46 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 89: Rgb Port

    Check the setup condition of the external display and returns to Procedure 1. As for the setting of the external display, refer to the instruction manual for the TV. If the problem still exists, perform Check 3. 2-47 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...

  • Page 90: Lan Port

    LAN cable may be faulty. Replace it with a new one. If the problem still occurs, perform Check 3. Check 3 USB Type-C adapter may be faulty. Replace it with a new one. If the problem still exists, check the PC condition. 2-48 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 91: Chapter 3 Tests And Diagnostics

    3 Tests and Diagnostics Chapter 3 Tests and Diagnostics PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 92 3 Tests and Diagnostics 3-ii [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 93 SETUP ........................3-26 3.16.1 Function Description ................3-26 3.16.2 Accessing to the SETUP Program ............. 3-29 3.17 Sensor calibration tool ..................... 3-34 3.17.1 Outline ....................3-34 3.17.2 Preparation ..................3-35 3-iii PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 94 3 Tests and Diagnostics 3.17.3 Start and Test procedure ..............3-36 3.17.4 Result ....................3-40 3.17.5 Log ..................... 3-41 3.17.6 How to terminate this tool ..............3-43 3-iv [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 95: Test Program For Maintenance

    There are programs to write the HW information and to check the function of HW components in the diagnostic test. You will need the following equipment to perform some of the diagnostic test programs. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...

  • Page 96: Setting Of Battery Off Mode

    Check the [Advanced] – [System Configuration] in the BIOS setup screen. You can see [Battery disconnect] item. Connect the AC adapter and execute it to set the “Battery Off mode” state. [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 97: How To Execute The Test Program

    Then repeat from Step 2. Procedure 2: Check of hardware information The program checks and displays the hardware information such as HDD and SSD of the computer. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 98 Does it update EC/KBC (Vx.xx->Vx.xx)? (Y or N), or press [Enter] (Selection=Y)? When the message above appears, pressing ENTER will start EC/KBC update. Then, since the computer reboots automatically, repeat from Step 2. If the update is not needed, press N. [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 99 To start the Heatrun Test, press 2 and Enter. To start the Main Test Menu, press 3 and Enter. NOTE: Before starting the diagnostics, be sure to that all the cables are connected firmly. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...

  • Page 100: Entry Of The Dmi Information

    **** Warning : Update DMI really? (y/n) *** The PC will restart. Press F12 and select the USB memory as the boot device. Then the following screen will appear. (Screen sample) [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 101 ・Cancel : ends this program. When Cancel button is pressed, the PC will restart. Press F12 and select the USB memory as the boot device. Then this program will return to the test program screen. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...

  • Page 102: Heatrun Test

    2. Sequential Read Test Refer to Subtest 1 of 3.7 Hard disk/SSD Test 3. V-RAM Memory test Refer to Subtest 2 of 3.6 Memory Test To terminate the program, press SHIFT + Q. [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 103: Main Test Menu

    ENTER. The following table shows the subtests names of each test. Table 3-1 Subtest names (1/2) TEST No TEST NAME SUBTEST No SUBTEST NAME MEMORY Main Memory Test V-RAM Memory Test PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 104 The setting of Yes/No can be changed by pressing ENTER. Error Stop Select Yes: if any error occurs during the test, the test is suspended and key input is required. 3-10 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 105 The subtest is started in the conditions selected above by entering ENTER. For more information about the tests in the Main Test Menu and other tests, refer to Section 3.6 or later. 3-11 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...

  • Page 106: Memory Test

    If the test data and read data is not the same, this test displays a message of the data comparing error and writes the information to the text file (errorlog.txt) as an error log. As for the details of the error log, refer to 3.12 Log utility. 3-12 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 107: Hard Disk/Ssd Test

    3. LBA 86 (=22 + 64) (by 512-byte) 4. LBA 45 (=86 - 41) (by 512-byte) At Step 1, this test starts from the LBA 63 and writes the test data by 512-byte. 3-13 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 108 ) If the test data and read data is not the same, this test displays a message of “Data Compare error” and writes the information to the text file (errorlog.txt) as an error log. (1 LBA (512-byte)) Number of Passes LBA No. ００００００・・・・・・・・・・・・ (UINT32) （UINT32） 3-14 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 109 If any errors occur at comparing, this test displays the message “ ” and Compare error writes the information to the text file (errorlog.txt) as an error log. As for the details of the error log, refer to 3.12 Log utility. 3-15 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...

  • Page 110: Keyboard Test

    B (right click button), and displays the information in real time. To back to the Keyboard test menu screen, press the button A and B. (Displayed information) [X: xxxx] [Y: xxxx] [Button A : x] [Button B : x] 3-16 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 111: Lcd Panel Test

    This test displays the white screen for 5 sec. and then the black screen for 5 sec. After that, this test backs to the LCD Panel test menu screen automatically. 3-17 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 112 This test displays the white screen and changes the LCD brightness to the maximum, middle and low setting in order with 5-sec intervals. After that this test backs to the LCD Panel test menu screen automatically. 3-18 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 113: Battery Charge Test

    The test starts by pressing ENTER. The test gets the charging status of the mounted battery pack and displays the message. To back to the main menu screen, press ENTER. 3-19 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...

  • Page 114: Fan Test

    OK appears in the display if the test ends without an error. NG appears in the display if an error is found during the test. To back to the main menu screen, press ENTER. 3-20 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 115: Log Utility

    ・Write..Write value（Memory Test/HDD Test） ・Read..Read value（Memory Test/HDD Test/ Battery Charge Test） To clear the log information, press C. To back to the main menu screen, press ENTER. 3-21 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...

  • Page 116: Wireless Module Test

    Bluetooth function is mounted. <How to display PC system information screen> 1. Click Start button. 2. Click [dynabook サービスステーション(dynabook Service Station)] -> [シ ステム情報(System information)]. Check the content of “ネットワーク(Netwrok)”. If “Wireless**” appears in the screen, it means the wireless module has been recognized.

  • Page 117: Check Of The Antenna Connection

    In the case of no-antenna connection If AP should be ready but no AP point appears, any problem might occur on the wireless module or on the antenna connection. 3-23 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...

  • Page 118: Lte Test

    Since there is no 5G/LTE test in the test program for maintenance, check if the 5G or LTE module is recognized by the PC on Windows. Start the device manager. If “EMxxxx” is shown under “Network adapters”, the module is recognized. (Sample of a module name) 3-24 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 119: Sound Test

    3 Tests and Diagnostics 3.15 Sound Test Since there is no sound test in the test program for maintenance, check the functions related to sound on Windows with music data, etc. 3-25 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...

  • Page 120: Setup

    *1: This item is shown only when a supervisor password is set. *2: This item is shown only on some models. *3: This item is shown only when both the User and Master HDD Password. 3-26 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 121 - ACPI Secure Devices Table - Large aperture graphics adapters - eco Charge Mode - Battery Disconnect - Absolute Persistence Configuration Diagnostic - Start HDD/SSD Test - HDD/SSD Test Mode - Start Memory Test 3-27 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 122 Boot Option #2 Boot Option #3 Boot Option #4 Priority for devices Add New Boot Option Exit menu Exit Saving Changes Exit Discarding Changes Load Setup Defaults Save Changes and Power Off 3-28 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 123: Accessing To The Setup Program

    3 Tests and Diagnostics 3.16.2 Accessing to the SETUP Program Turn on the power while pressing F2 of the keyboard. The following display appears. Main menu screen Security menu screen 3-29 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 124 3 Tests and Diagnostics Power Management menu screen Advanced menu screen 3-30 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 125 3 Tests and Diagnostics Boot menu screen Exit menu screen 3-31 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 126 The Factory Preset Configuration When you access SETUP, the current configuration is displayed. 1. To show the factory preset configuration, press F9. 2. To accept the default settings, press Y. 3-32 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 127 3 Tests and Diagnostics How to change setup Options Since a help is displayed on the right-hand side of each menu screen, refer it before change. 3-33 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...

  • Page 128: Sensor Calibration Tool

    ● Replacing of the chassis or keyboard ● Disassembling/assembling of PC including removal and attachment of the sensor harness ● Replacing of the front Web camera The following explains how to operate the tool. 3-34 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 129: Preparation

    3 Tests and Diagnostics 3.17.2 Preparation Unzip the following file and copy all the contents to a USB memory. ・ Diamond10SensorCalibrationToolV***.Zip 3-35 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...

  • Page 130: Start And Test Procedure

    Procedure 5: Change the PC to be tested into Tablet style and lay it on the horizontal and stable table as the screen faces up. Procedure 6: Touch “Start Test Now“ button to start the test. 3-36 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 131 Touch “Setup OK” button when the PC is ready. The Gyro calibration is performed automatically. Power button When the Gyro calibration test is completed, the screen Step 1 of Acceleration calibration test will appear. 3-37 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 132 “STEP 1 XXXXXX” Step 2: Make the side with the power button bottom side slowly. When is displayed, go to the next step. “STEP 2 XXXXXX” 3-38 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 133 “STEP 3 XXXXXX” Step 4: Lay the PC as the display faces up. When is displayed, the Acceleration calibration test is “STEP 4 XXXXXX” completed. 3-39 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...

  • Page 134: Result

    If this test ends successfully, “PASS” is displayed. Tap “OK” button to back to the start screen. FAIL If any problem occurred, “FAIL” will be displayed. Tap “OK” button to back to the start screen. 3-40 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 135: Log

    2. Touch “Save” on “Log Information Display” to display “Output a LogFile to external”. 3. Select a folder to save the information file and touch “Save”. The log file named “wintndx.log” or “wintndx64.log” will be output to (saved in) the specified folder. 3-41 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 136 3 Tests and Diagnostics Specify the output folder. Output the log file. 3-42 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 137: How To Terminate This Tool

    3 Tests and Diagnostics 3.17.6 How to terminate this tool Select “Close” on the tart screen. The computer is powered off. 3-43 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 138 3 Tests and Diagnostics 3-44 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 139 Chapter 4 Replacement Procedures...
  • Page 140 4 Replacement Procedures 4-ii [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 141 W-LAN ANTENNA ....................4-57 4.15 LID BOARD ......................4-62 4.16 REAR CAMERA MODULE ................... 4-64 4.17 LCD FAT ASSY/COVER ASSY ................4-66 4.18 KEYBOARD ......................4-68 4.19 LCD/CAMERA MODULE ..................4-72 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-iii...
  • Page 142 Figure 4-28 Removing the LCD (3)................... 4-78 Figure 4-29 Removing the LCD (4)................... 4-79 Figure 4-30 Removing the CAMERA MODULE (1) ............4-80 Figure 4-31 Removing the CAMERA MODULE (2) ............4-81 4-iv [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 143: Overview

    (Micro SD card) must be removed. When repairing an FRU that is the potential cause of a computer fault, use the chart to determine the order in which FRUs need to be removed. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 144 ITEM No 5G/LTE CLICK PAD AL TAPE CLICK PAD D TAPE PAD MIMO2 ANTENNA Quantity Parts List ITEM PART NAME ITEM No 5G/LTE LID BOARD LID BOARD D TAPE PCB LID 4-2 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 145 ITEM No 5G/LTE LCD COVER ASSY HINGE CAP L ASSY HINGE CAP R ASSY INSU SQUARE(261) LCD COVER ASSY (HD camera model) CU TAPE (FA camera model) MAGNET (310) MAGNET (410) PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 146 TAPE SEPA (211), D TAPE TP SIDE L, D TAPE TP LS L, D TAPE TP LOW L, D TAPE TP SIDE R, D TAPE TP LS R, D TAPE TP LOW R and D TAPE TP L CE. 4-4 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 147 SCREW M2.5X6 FLAT HEAD M2.56B FLAT HEAD M2.54B FLAT HEAD SCREW M2.5X4 FLAT HEAD M2.56B FLAT HEAD SCREW M2.5X6 FLAT HEAD SCREW M2X4 S-THIN M24C S-THIN HEAD SCREW M2.5X4 TORX HEAD M2.5x4B TORX HEAD PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 148 6) Some parts inside the computer, such as the CPU and cooling module, become very hot during operation. Conduct repair work after they have cooled. Be careful around the CPU and cooling module to avoid burns. 4-6 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 149 11. Be careful that not to break the computer casing and harnesses by the removed parts. 12. After replacing an FRU, check that the computer and replaced part operate correctly. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 150 Pull the cable to ensure that it is securely connected. Normal pin connectors are used for all other cables. Simply pull out or push in these connectors to disconnect or reconnect. Pressure plate connector Spring connector Back flip connector 4-8 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 151  When checking the computer moved correctly, do not put the excessive power on the hinges and computer itself. After installing FRUs, check that the computer operates correctly. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 152  Antenna coaxial cable disconnector Rev.01  One T8-size torx screwdriver (star screwdriver) corresponding to tamper-proof pin (only for JP 5G/LTE model) (for TORX HEAD screws removing/fixing the BASE ASSY) 4-10 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 153 Press along the axis of the screwdriver while turning the screw. This is because the contact area between the screw and driver is less than for a pan head screw (standard pan-shaped screw head). PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-11...
  • Page 154 U: Other screws (Unique screws: pan head, stud, etc.) Example: B6 ... 6mm BIND screw Screw color/material B: Black/Nickel C: Silver/Non-Hexavalent Chromate U: Other screws (Unique screws: such as stud, etc.) 4-12 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 155: Sim Card

    To install the SIM Card, follow the steps below and refer to Figure 4-1. 1. Set the SIM card on the SIM card tray. 2. Set the SIM card tray (with the SIM card) into the SIM card slot. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-13...

  • Page 156: Micro Sd Card

    To install the Micro SD Card, follow the steps below and refer to Figure 4-2. 3. Insert the Micro SD card into the slot and push it carefully to ensure a firm connection. 4-14 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 157: Base Assy

    When the color of the computer is black, fix the BASE ASSY or BASE LTE ASSY with the black nickel screws. 5. Remove the BASE ASSY or BASE LTE ASSY while releasing the latches. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-15...
  • Page 158 4 Replacement Procedures 4.4 BASE ASSY < non 5G/LTE model > BASE ASSY Figure 4-3 Removing the BASE ASSY (1) 4-16 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 159 4.4 BASE ASSY 4 Replacement Procedures Rev.01 < 5G/LTE model > BASE LTE ASSY Figure 4-4 Removing the BASE ASSY (2) PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-17...
  • Page 160 NOTE: When replacing the BASE ASSY or BASE LTE ASSY with a new one, stick new SQUARE CUSHION (351) and CAUTION SEAL to the BASE ASSY or BASE LTE ASSY in place. 4-18 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 161 Prepare required parts in advance, when replacing the following items. Quantity Parts List ITEM PART NAME ITEM No 5G/LTE BASE ASSY BASE LTE ASSY BASE ASSY SQUARE CUSHION (351) 90,91 CAUTION SEAL PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-19...

  • Page 162: Battery Pack

    3. Remove the following screws and the BATTERY PACK.  M24C 2 S-THIN HEAD screw CAUTION: The replaced battery must be disposed according to the laws and ordinances of your local authority. 4-20 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 163 4.5 BATTERY PACK 4 Replacement Procedures M2x4C S-THIN HEAD INSU SQUARE M2x4C S-THIN HEAD BATTERY PACK BATTERY HARNESS CN8021 Figure 4-5 Removing the BATTERY PACK PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-21...
  • Page 164 1. Set the BATTERY PACK to the COVER ASSY and secure it with the following screws.  M24C 2 S-THIN HEAD screw 2. Connect the BATTERY HARNESS to the connector CN8021 on the SYSTEM BOARD. 3. Stick the INSU SQUARE in place. 4-22 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

  • Page 165: Speaker

    2. Disconnect the FP FFC (finger print sensor model) and CPAD FFC from the connectors CN9550 and CN9510 on the SYSTEM BOARD. CPAD FFC Mark CN9510 CN9550 FP FFC Figure 4-6 Removing the SPEAKER (1) PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-23...
  • Page 166 INSU KB LOW or INSU KB LOW 5G. INSU KB LOW or INSU KB LOW 5G INSU KB LOW 5G has another tab. Open it together. Figure 4-7 Removing the SPEAKER (2) 4-24 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 167 5. Remove the SPEAKER or SPEAKER 5G (left and right) from the slots of the COVER ASSY. SPEAKER or SPEAKER 5G CN6290 SPEAKER HARNESS Figure 4-8 Removing the SPEAKER (3) PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-25...
  • Page 168 CN9550 and CN9510 on the SYSTEM BOARD. 5. Connect the marked side of the FP FFC (finger print sensor model) and CPAD FFC to the connectors on the CLICK PAD. 4-26 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 169 3. Remove the following screw and disconnect 5G MODULE from the connector CN2610 or LTE MODULE from the connector CN2600 on the SYSTEM BOARD.  M22.3C S-THIN HEAD screw 1 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-27...
  • Page 170 5G MAIN ANTENNA Cable (red) INSU SQUARE (271) < LTE MODULE > 5G AUX ANTENNA Cable (blue) 5G MAIN ANTENNA Cable (red) M2x2.3C S-THIN HEAD INSU SQUARE (271) Figure 4-9 Removing the 5G/LTE MODULE 4-28 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 171 ③ Stick the MIMO2 cable (black) to the Do not pass the cable on INSU. To make the space for MIMO1 cable, the rib. stick it along to the AUX cable (blue). PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-29...
  • Page 172 System board corner. ③ Pass the MAIN cable (red) on the AUX, MIMO2 and MIMO1 cables. ① Fix the cables with INSU. ② Fix the cables with INSU KB LOW 5G. 4-30 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 173 LTE module. ② Pass the MAIN cable (red) under the System board corner first. Then hook it to the boss. ③ Stick the MAIN cable (red) to the INSU. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-31...
  • Page 174 Stick the INSU SQUARE to the 5G MODULE or LTE MODULE NOTE: (5G model) Stick the INSU SQUARE as shown below; To the module edge INSU SQUARE To the module edge 4-32 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 175 1. Press the latch to the arrow direction to release. 2. Pull up the GASKET HOLDER. 3. Release the latch and remove the GASKET HOLDER. ② ① ③ Latch GASKET HOLDER Figure 4-10 Removing the 5G/LTE ANTENNA (1) PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-33...
  • Page 176 4. Remove the 5G ANTENNA SPACERs and the INSU SQUAREs. Turn up the INSU ANT HOLD. NOTE: Do not reuse the removed INSU SQUAREs. Be sure to use new ones. Figure 4-11 Removing the 5G/LTE ANTENNA (2) 4-34 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 177 (LTE model) Remove the MAIN ANTENNA and AUX ANTENNA. NOTE: Do not reuse the removed ANTENNAs. Be sure to use new ones. < 5G model > < LTE model > Figure 4-12 Removing the 5G/LTE ANTENNA (3) PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-35...
  • Page 178 (LTE model) Stick the MAIN ANTENNA and AUX ANTENNA to the COVER ASSY in place and arrange the cables in place. Stick the 5G ANTENNA SPACERs and the INSU SQUAREs in place. Close the INSU ANT HOLD. 4-36 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 179 4.8 5G/LTE ANTENNA 4 Replacement Procedures Rev.01 NOTE: Stick the ANTENNAs and arrange the cables according to the order and the steps below; < 5G model > PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-37...
  • Page 180 Pass the cable in along the rib. the palm rest side Fix the cable with INSU ANT HOLD Fix the cable with Do not pass on INSU SQUARE the PAD rib 4-38 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 181 Prepare required parts in advance, when replacing the following items. Quantity Parts List ITEM PART NAME ITEM No 5G/LTE MAIN ANTENNA AUX ANTENNA 5G/LTE ANTENNA MIMO1 ANTENNA MIMO2 ANTENNA INSU SQUARE(111) PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-39...
  • Page 182 NOTE: Do not touch the center portion of the FANs. M2x4C S-THIN HEAD CN3380 M2x4C S-THIN HEAD FAN L HARNESS FAN R (FAN1) FAN R HARNESS FAN L (FAN2) CN3390 Figure 4-13 Removing the FAN 4-40 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 183 4. Set the FAN L to the COVER ASSY and secure it with the following screws.  M24C 2 S-THIN HEAD screw 4. Connect the FAN L HARNESS to the connector CN3390 on the SYSTEM BOARD. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-41...
  • Page 184 1. Remove the following screw and disconnect the SSD from the connector CN1900 on the SYSTEM BOARD.  M22.5 1 FLAT HEAD DANTUKI screw M2x2.5 FLAT HEAD DANTUKI CN1900 Figure 4-14 Removing the SSD 4-42 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 185 To install the SSD, follow the steps below and refer to Figure 4-14. 1. Insert the SSD to the connector CN1900 on the SYSTEM BOARD. 2. Secure the SSD with the following screw.  M22.5 1 FLAT HEAD DANTUKI screw PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-43...
  • Page 186 NOTE: When removing the HEAT SINK, be sure to remove the screws in the reverse order of the number marked on the HEAT SINK. M2x2.3C S-THIN HEAD M2x2.3C S-THIN HEAD HEAT SINK Figure 4-15 Removing the HEAT SINK 4-44 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 187 3. Set the HEAT SINK in place and secure it with the following screws.  M22.3C 4 S-THIN HEAD screw NOTE: When securing the HEAT SINK, be sure to secure the screws in the order of the number marked on the HEAT SINK. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-45...
  • Page 188 (MBR-DPK) must be written on the SYSTEM BOARD. 4. When removing/installing the SYSTEM BOARD, handle with both hands and do not handle with the handling prohibition area (refer to the figure below). 4-46 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 189 4. Release the lock bar and disconnect the LCD HARNESS from the connector CN5390 on the SYSTEM BOARD. 5. Disconnect the REAR CAMERA FPC from the connector CN9560 on the SYSTEM BOARD. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-47...
  • Page 190 W-LAN ANTENNA CABLE (white) INSU Lock bar LCD HARNESS REAR CAMERA FPC (Connected to CN5390) (Connected to CN9560) CAMERA HARNESS (Connected to CN9540) Figure 4-16 Removing the SYSTEM BOARD (1) 4-48 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 191 4 Replacement Procedures 6. Remove the following screws and the SYSTEM BOARD.  M24C 2 S-THIN HEAD screw M2x4C S-THIN HEAD SYSTEM BOARD Figure 4-17 Removing the SYSTEM BOARD (2) PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-49...
  • Page 192 NOTE: When replacing the SYSTEM BOARD with a new one, stick the INSU SQUARE (321), COOL SHEET (H10), COOL SHEET (J10), SQUARE CUSHION (161), INSU PCB SSD, INSU PCB PIPE L and INSU PCB PIPE R to the SYSTEM BOARD in place. 4-50 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 193 4.12 SYSTEM BOARD 4 Replacement Procedures INSU PCB SSD INSU PCB PIPE R INSU PCB PIPE L PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-51...
  • Page 194 2. Connect the REAR CAMERA FPC to the connector CN9560 on the SYSTEM BOARD. 3. Connect the LCD HARNESS to the connector CN5390 on the SYSTEM BOARD and fix it with the lock bar. 4-52 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 195 Prepare required parts in advance, when replacing the following items. Quantity Parts List ITEM PART NAME ITEM No 5G/LTE MOTHER BOARD ASSY SYSTEM BOARD SQUARE CUSHION (161) (MOTHER BOARD COOL SHEET(H10) ASSY) COOL SHEET(J10) PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-53...
  • Page 196 2. Peel off the CLICK PAD from the COVER ASSY. NOTE: Do not reuse the removed AL TAPE and CLICK PAD. Be sure to use new ones. AL TAPE CLICK PAD Figure 4-18 Removing the CLICK PAD 4-54 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 197 1. When replacing the CLICK PAD with a new one, replace the D TAPE PAD on the COVER ASSY with a new one in place. CLICK PAD D TAPE PAD AL TAPE 2.(5G model) Stick a new MIMO2 ANTENNA in place. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-55...
  • Page 198 Prepare required parts in advance, when replacing the following items. Quantity Parts List ITEM PART NAME ITEM No 5G/LTE CLICK PAD AL TAPE CLICK PAD D TAPE PAD MIMO2 ANTENNA 4-56 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 199 W-LAN MAIN ANTENNA (white cable) M2x4C S-THIN HEAD CORNER CAP R INSU INSU W-LAN MAIN ANTENNA CABLE (white) W-LAN AUX ANTENNA CABLE (black) Figure 4-19 Removing the W-LAN ANTENNA (1) PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-57...
  • Page 200 6. Peel off the W-LAN AUX ANTENNA (black cable) from the CORNER CAP L. W-LAN AUX ANTENNA (black cable) W-LAN AUX ANTENNA CABLE (black) INSU M2x4C S-THIN HEAD CORNER CAP L INSU Figure 4-20 Removing the W-LAN ANTENNA (2) 4-58 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 201 4. Set the CORNER CAP R (W-LAN MAIN ANTENNA (white cable)) to the COVER ASSY and secure it with the following screw.  M24C 1 S-THIN HEAD screw 5. Arrange the W-LAN ANTENNA CABLEs in place. 6. Close the INSUs. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-59...
  • Page 202 4 Replacement Procedures 4.14 W-LAN ANTENNA NOTE: Arrange the W-LAN ANTENNA CABLEs as shown in the figure below. 4-60 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 203 4.14 W-LAN ANTENNA 4 Replacement Procedures PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-61...
  • Page 204 1. Peel off the LID BOARD from the guides of the COVER ASSY. 2. Disconnect the LID HARNESS from the connector CN3291 on the LID BOARD. LID HARNESS LID BOARD CN3291 Guide Figure 4-21 Removing the LID BOARD 4-62 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 205 2. Set the LID BOARD to the guides of the COVER ASSY. Prepare required parts in advance, when replacing the following items. Rev.01 Quantity Parts List ITEM PART NAME ITEM No 5G/LTE LID BOARD LID BOARD D TAPE PCB LID PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-63...
  • Page 206 To remove the REAR CAMERA MODULE, follow the steps below and refer to Figure 4-22. 1. Open the INSU. 2. Remove the REAR CAMERA MODULE from the slot of the COVER ASSY. REAR CAMERA MODULE INSU Figure 4-22 Removing the REAR CAMERA MODULE 4-64 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 207 To install the REAR CAMERA MODULE, follow the steps below and refer to Figure 4-22. 1. Set the REAR CAMERA MODULE to slot of the COVER ASSY. 2. Close the INSU. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-65...
  • Page 208 1. Remove the following screws and separate the LCD FAT ASSY and COVER ASSY.  M2.54B 3 FLAT HEAD screw M2.5x4B FLAT HEAD M2.5x4B FLAT HEAD COVER ASSY LCD FAT ASSY Figure 4-23 Removing the LCD FAT ASSY/COVER ASSY 4-66 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 209 COVER LTE ASSY AL TAPE CLICK PAD MAIN ANTENNA AUX ANTENNA MIMO1 ANTENNA COVER ASSY MIMO2 ANTENNA GASKET(R10) GASKET(T10) INSU KB LOW INSU KB LOW 5G FIN CUSHION COV INSU SQUARE(111) PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-67...
  • Page 210 NOTE: Do not reuse the removed INSU KB LOW or INSU KB LOW 5G. Be sure to use a new one. INSU KB LOW or INSU KB LOW 5G Figure 4-24 Removing the KEYBOARD (1) 4-68 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 211  M1.21.1B 63 S-THIN HEAD screw 3. Remove the KEYBOARD. NOTE: The KEYBOARD is very thin, so be careful of handling. M1.2x1.1B S-THIN HEAD KEYBOARD Figure 4-25 Removing the KEYBOARD (2) PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-69...
  • Page 212 NOTE: 1. Prepare INSU KB LOW for non 5G/LTE model, INSU KB LOW 5G for 5G and LTE model. < INSU KB LOW > < INSU KB LOW 5G > 4-70 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 213 Prepare the required parts in advance, when replacing the following items. Quantity Parts List ITEM PART NAME ITEM No 5G/LTE KEYBOARD INSU KB LOW KEYBOARD INSU KB LOW 5G FIN CUSHION COV PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-71...
  • Page 214 NOTE: Do not reuse the removed HINGE CAP L ASSY and HINGE CAP R ASSY, be sure to use new ones. HINGE CAP R ASSY LCD LOW CAP ASSY HINGE CAP L ASSY Figure 4-26 Removing the LCD (1) 4-72 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 215 4.19 LCD/CAMERA MODULE 4 Replacement Procedures NOTE: Remove the HINGE CAP L ASSY, LCD LOW CAP ASSY and HINGE CAP R ASSY as shown in the figure below. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-73...
  • Page 216 4. Release the LCD HARNESS and CAMERA HARNESS from the HINGE L/R ASSY. M2.5x2.5C S-THIN HEAD LCD HARNESS HINGE R ASSY M2.5x2.5C S-THIN HEAD CAMERA HARNESS HINGE L ASSY Figure 4-27 Removing the LCD (2) 4-74 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 217 7. Pull the D TAPE TP L CE to the arrow pointing. 8. Peel the 3AXIS SENSOR BOARD. 9. Close the SHUTTER SWITCH. 10. Peel the LCD UNIT slowly. NOTE: Remove the LCD UNIT as shown in the figure below. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-75...
  • Page 218 4 Replacement Procedures 4.19 LCD/CAMERA MODULE 4-76 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 219 4.19 LCD/CAMERA MODULE 4 Replacement Procedures PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-77...
  • Page 220 D TAPE TP LOW R 3AXIS SENSOR BOARD LCD UNIT D TAPE TP LOW L D TAPE TP LS L D TAPE TP SIDE L Figure 4-28 Removing the LCD (3) 4-78 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 221 14. Disconnect the SENSOR HARNESS from the connector CN9860 on the 3AXIS SENSOR BOARD. 3AXIS SENSOR BOARD INSU SQUARE SENSOR HARNESS CN9860 TOUCH PANEL Lock bar HARNESS LCD HARNESS Connector Figure 4-29 Removing the LCD (4) PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-79...
  • Page 222 17. Remove the SHUTTER SWITCH from the CAMERA COV ASSY. 18. Remove the CAMERA MODULE from the LCD COVER ASSY. SHUTTER SWITCH CAMERA MODULE CAMERA COV ASSY Connector CAMERA HARNESS Figure 4-30 Removing the CAMERA MODULE (1) 4-80 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 223 4.19 LCD/CAMERA MODULE 4 Replacement Procedures 19. Remove the CAMERA HARNESS (FPC portion) from the LCD COVER ASSY. CAMERA HARNESS D STICK TAPE Figure 4-31 Removing the CAMERA MODULE (2) PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-81...
  • Page 224 SEPA (201/211), D TAPE TP SIDE L, D TAPE TP LS L, D TAPE TP LOW L, D TAPE TP SIDE R, D TAPE LS R, D TAPE TP LOW R and D TAPE TP L CE to the LCD COVER ASSY in place. 4-82 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 225 7. Connect the LCD HARNESS to the connector on the LCD UNIT and lay down the lock bar to engage. 8. Connect the TOUCH PANEL HARNESS to the connector on the TOUCH PANEL. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-83...
  • Page 226 19. Peel off the separator and set the HINGE CAP L ASSY to the LCD COVER ASSY while engaging the latches. 20. Peel off the separator and set the HINGE CAP R ASSY to the LCD COVER ASSY while engaging the latches. 4-84 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 227 D TAPE TP LS L D TAPE TP LOW L D TAPE TP SIDE R D TAPE TP LS R D TAPE TP LOW R D TAPE TP L CE PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-85...
  • Page 228 4 Replacement Procedures 4.19 LCD/CAMERA MODULE 4-86 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 229 Appendices [CONFIDENTIAL]...
  • Page 230 Appendices App-ii [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 231 Appendix D Keyboard Matrix................... D-1 Appendix E Key Layout ..................... E-1 Appendix F Wiring Diagrams.................... F-1 Appendix G BIOS rewrite Procedures................G-1 Appendix H EC/KBC rewrite Procedures ............... H-1 Appendix I Reliability ......................I-1 App-iii PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 232 Appendices App-iv [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 233 LCD cover before securing the module with screws. Do not force the module into place, because stress can affect its performance. Also, the panel’s polarized surface is easily scarred, so be careful when handling it. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series (960-941) [CONFIDENTIAL] Maintenance Manual...
  • Page 234 4. If water or other liquid is left on the panel’s surface for a long period, it can change the screen’s tint or stain it. Be sure to quickly wipe off any liquid. [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 235 6. CMOS-LSI circuits are used in the module, so guard against damage from electrostatic discharge. Be sure to wear a wrist or ankle ground when handling the module. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 236 8. Do not store the module at temperatures below specifications. Cold can cause the liquid crystals to freeze, lose their elasticity or otherwise suffer damage. 9. Do not disassemble the LCD module. Disassembly can cause malfunctions. [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 237 10. If you transport the module, do not use packing material that contains epoxy resin (amine) or silicon glue (alcohol or oxide). These materials can release gas that can damage the panel’s polarization. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 238 Appendices Appendix A Handling the LCD Module [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 239 Table B-1 System board (FDIASY*) connectors and ICs (Front) .......... B-1 Table B-2 System board (FDIASY*) connectors and ICs (Back) .......... B-3 Table B-3 Sensor board (FDIASE*) connectors and ICs ............B-4 Table B-4 Lid board (FDIALS*) connectors ................B-5 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 240 Appendix B Board Layout Appendices B-ii [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 241 Figure B-1 System board (FDIASY*) layout (Front) Table B-1 System board (FDIASY*) connectors and ICs (Front) Name CN4800 USB Type-C connector CN4821 USB Type-C connector IS2641 nano SIM card I/F connector IS2220 Micro SD card I/F connector PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 242 B.2 System board (FDIASY*) Back View CN3380 CN9510 CN3260 CN6290 CN8021 J6320 CN9550 CN1900 CN3270 CN5690 CN2600 CN2610 CN4850 CN3390 CN3290 CN5390 CN9560 CN9540 Figure B-2 System board (FDIASY*) layout (Back) [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 243 CN2610 M.2 5G I/F connector CN4850 USB Type-A connector CN3290 Lid board I/F connector CN9540 Web camera+FA I/F connector CN5390 LCD(eDP)&TouchPanel&Axis sensor board I/F connector CN9560 Web camera (Rear) I/F connector PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 244 B.3 3AXIS sensor board (FDIASE*) View (Front) CN9860 IC3350 (Back) Figure B-3 Sensor board (FDIASE*) layout Table B-3 Sensor board (FDIASE*) connectors and ICs Name IC3350 Accelerometer CN9860 System board I/F connector [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 245 Appendices B.4 Lid board (FDIALS*) View CN3291 (Front) IC3290 (Back) Figure B-4 Lid board (FDIALS*) layout Table B-4 Lid board (FDIALS*) connectors Name CN3291 System board I/F connector IC3290 Lid sensor PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 246 Appendix B Board Layout Appendices [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 247 3AXIS sensor board (FDIASE*) ........................C-14 C.22 IC3350 Accelerometer&Gyroscope (14-pin) .................. C-14 C.23 CN9860 System board I/F connector (5-pin) ................. C-14 Lid board (FDIALS*) ............................C-15 C.24 CN3291 System board I/F connector (3-pin) .................. C-15 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 248 Table C-21 USB Type-C (2) I/F connector (24-pin) ..................C-13 Table C-22 Accelerometer&Gyroscope (14-pin) ................... C-14 Table C-23 System board I/F connector (5-pin) .................... C-14 Table C-24 System board I/F connector (3-pin) .................... C-15 C-ii [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 249 Table C-1 Web camera (Rear) I/F connector (31-pin) Pin No. Signal name Pin No. Signal name XCSIBC-E1P MCMV2R8-P2V XCSIBC-E1N MCMV2R8-P2V ZCSIB1-E1P ZCSIB1-E1N MCMA2R8-P2V ZCSIB3-E1P MCM1R2-P1V ZCSIB3-E1N IMGCK0-E1P MCMRST-E1N I2CDT3-P1P ZCSIB2-E1P I2CCK3-P1P ZCSIB2-E1N MCM1R8-P1V ZCSIB0-E1P ZCSIB0-E1N PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 250 ZEDPAU-P1P ISHDA0-E3P ZEDPA0-P1P ZEDPA0-P1N ISHCL0-E3P PVT-EF ZEDPA1-P1P PVT-EF ZEDPA1-P1N PVT-EF PVT-EF (ZEDPA2-P1P) BKLPWM-E3P (ZEDPA2-P1N) 321 530 (EDPA3-P1P) (EDPA3-P1N) TPNLDT-P3N EDPHPD-P3P TPINT-P3N I2CDT1-P3P I2CCK1-P3P IC5390-4 PNL-P3V TP-P3V PNL-P3V TP-P3V PNL-P3V PNL-P3V ZEDPAU-P1N [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 251 Pin No. Signal name ZUSBCF-E3N DMICIN-P1P ZUSBCF-E3P XDMCLK-E1P CAMDET-P3N CN3380 FAN (1) I/F connector (4-pin) Table C-4 FAN (1) I/F connector (4-pin) Pin No. Signal name Pin No. Signal name FANG0-P3P IC3380-4 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 252 CN2600 M.2 LTE I/F connector (75-pin) Table C-5 M.2 LTE I/Fconnector (75-pin) (1/2) Pin No. Signal name Pin No. Signal name 3GON-E1P ZUSB3G-E3P GRFON-E3P ZUSB3G-E3N 3GSAR-E1N ZU33GR-E1N UIMRS3G-E3P ZU33GR-E1P UIMCL3G-E3P UIMIO3G-E3P ZU33GT-E1N UIMPW3G-E3V ZU33GT-E1P [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 253 Appendix C Pin Assignments Appendices Table C-5 M.2 LTE I/Fconnector (75-pin) (2/2) Pin No. Signal name Pin No. Signal name UIMDT3G-E3N 3GDET-E3N PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 254 Pin No. Signal name Pin No. Signal name 5G-E3V 5G-E3V 5GON-E1P ZUSB5G-E3P 5GRFON-E3P ZUSB5G-E3N 5GWAKE-E3N/PEWAKE-E3N 5G-E3V 5GSAR-E1N IC2612-2 IMRS5G-E3P UIMCL5G-E3P UIMIO5G-E3P UIMPW5G-E3V 5G-E3V ZER5G0-E1N ZER5G0-E1P ZET5G0-E1N ZET5G0-E1P PLTRS0-E3N 5GXRQ-P3N XPE5G-E0N 5GWAKE-E3N/PEWAKE-E3N XPE5G-E0P [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 255 Pin No. Signal name PNLOFF-S3N CN4850 USB Type-A connector (9-pin) Table C-8 USB Type-A connector (9-pin) Pin No. Signal name Pin No. Signal name USBPS0-E5V ZU3D1T-E1N ZUSBE3-E3N ZU3D1T-E1P ZUSBE3-E3P ZU3D1R-E1N ZU3D1R-E1P PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 256 UIMDT3G-E3N C.10 IS2220 SD card I/F connector (13-pin) Table C-10 SD card I/F connector (13-pin) Pin No. Signal name/ Pin No. Signal name SDAT2-P3P SDAT3-P3P SDCMD-P3P FMC-P3V SDCLK-P3P SDAT0-P3P SDAT1-P3P SDCD-P3N [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 257 PDCLK-P3P IPDDAT-P3P I2CDT0-P3P IC9560-4 I2CCK0-P3P C.12 CN9550 Fingerprint sensor I/F connector (6-pin) Table C-12 Fingerprint sensor I/F connector (6-pin) Pin No. Signal name Pin No. Signal name ZUSBFS-E3N ZUSBFS-E3P FS-P3V FSDET-P3P PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 258 KBRT07-S3N KBSC12-S3N KBRT00-S3N KBSC13-S3N KBSC14-S3N KBSC00-S3N KBSC09-S3N C.14 CN3270 KB backlight I/F connector (4-pin) Table C-14 KB backlight I/F connector (4-pin) Pin No. Signal name Pin No. Signal name KBBLDT-P3N C-10 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 259 Pin No. Signal name FANG1-P3P IC3390-4 C.17 CN6290 Speaker I/F connector (4-pin) Table C-17 Speaker I/F connector (4-pin) Pin No. Signal Name Pin No. Signal Name SPOTL-PXN SPOTL-PXP SPOTR-PXN SPOTR-PXP PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] C-11...
  • Page 260 CN5690 HDMI I/F connector (19-pin) Table C-19 HDMI I/Fconnector (19-pin) Pin No. Signal name Pin No. Signal name ZHDMT2-P3P ZHDMT2-P3N ZHDMT1-P3P ZHDMT1-P3N ZHDMT0-P3P ZHDMT0-P3N XHDMCK-P3P XHDMCK-P3N HDMSCL-P5P HDMSDA-P5P HDMI-P5V IC5692-1 C-12 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 261 Table C-21 USB Type-C (2) I/F connector (24-pin) Pin No. Signal name Pin No. Signal name ZSS1T1-E0P ZSS1T0-E0P ZSS1T1-E0N ZSS1T0-E0N PDVBUS2 PDVBUS2 PA2CC2-SXP PA2CC1-SXP ZUSBE2-E3P ZUSBE2-E3P ZUSBE2-E3N ZUSBE2-E3N ZP2SB2-EXP ZP2SB1-EXP PDVBUS2 ZSS1R0-E0N ZSS1R1-E0N ZSS1R0-E0P ZSS1R1-E0P PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] C-13...
  • Page 262 Signal name ISHIN0-E3N ISHCL0-E3P ISHDA0-E3P C.23 CN9860 System board I/F connector (5-pin) Table C-23 System board I/F connector (5-pin) Pin No. Signal name Pin No. Signal name ISHCL0-E3P ISHDA0-E3P ISHIN0-E3N C-14 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 263 Appendix C Pin Assignments Appendices Lid board (FDIALS*) C.24 CN3291 System board I/F connector (3-pin) Table C-24 System board I/F connector (3-pin) Pin No. Signal name Pin No. Signal name PNLOFF-S3N PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] C-15...
  • Page 264 Appendix C Pin Assignments Appendices C-16 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 265 Keyboard for UK ...................... D-1 Keyboard for US ....................... D-2 Keyboard for JP ......................D-3 Figure D-1 UK Keyboard ....................D-1 Figure D-2 US Keyboard ..................... D-2 Figure D-3 JP Keyboard ...................... D-3 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 266 Appendices Appendix D Keyboard Matrix D-ii [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 267 Appendix D Keyboard Matrix Appendices Keyboard for UK Figure D-1 UK Keyboard PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 268 Appendices Appendix D Keyboard Matrix Keyboard for US Figure D-2 US Keyboard [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 269 Appendix D Keyboard Matrix Appendices Keyboard for JP Figure D-3 JP Keyboard dynabook PORTEGE A30-E/TECRA A30-G/dynabook S Series Maintenance Manual (960-931) [CONFIDENTIAL]...
  • Page 270 Appendices Appendix D Keyboard Matrix [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 271 Keyboard for UK ....................... E-1 Keyboard for US ......................E-1 Keyboard for JP ......................E-2 Figure E-1 UK Keyboard ...................... E-1 Figure E-2 US Keyboard ...................... E-1 Figure E-3 JP Keyboard ......................E-2 PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 272 Appendices Appendix E Key Layout E-ii [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 273 Appendix E Key Layout Appendices Keyboard for UK Figure E-1 UK Keyboard Keyboard for US Figure E-2 US Keyboard PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 274 Appendices Appendix E Key Layout Keyboard for JP Figure E-3 JP Keyboard [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 275 Appendix F Wiring diagrams Appendices Appendix F Wiring diagrams (Not used) RGB Monitor Loopback Connector Figure F-1 RGB Monitor Loopback Connector LAN Loopback Connector Figure F-2 LAN Loopback Connector PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 276 Appendices Appendix F Wiring diagrams [CONFIDENTIAL]PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 277 3. If you fail to rewrite BIOS, then when you next turn on the power, the power icon may flash in orange or an error message may be displayed. In this case, repeat the rewriting procedure. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 278 Appendices Appendix G BIOS rewrite procedures [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 279 This Appendix explains how to rewrite the EC/KBC system. The EC/KBC solely can’t be updated. It is updated at the BIOS update simultaneously. As for the BIOS update, refer to Appendix G. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 280 Appendices Appendix H EC/KBC rewrite procedures [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
  • Page 281 The following tables show MTBF (Mean Time between Failures) in maximum configuration. Table I-1 MTBF < non 5G/LTE model > Time (hours) 5,152.95 h < 5G model > Time (hours) 5,116.07 h < LTE model > Time (hours) 5,119.07 h PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
  • Page 282 Appendices Appendix I Reliability [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)

Table of Contents