Page 1
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Dynabook Portégé X30W X30W-K-102 o cerca il tuo prodotto tra le migliori offerte di Notebook Dynabook Personal Computer PORTÉGÉ X30W-J/X30W-K dynabook V*/VZ*/VC* Series Maintenance Manual Rev.00 Oct. 2020 First issue Rev.01...
Page 3
NOTE: “Note” contains general information that relates to your safe maintenance service. Improper repair of the computer may result in safety hazards. Dynabook requires service technicians and authorized dealers or service providers to ensure the following safety precautions are adhered to strictly.
Page 5
Text that you are instructed to type in is shown in the boldface type below: DISKCOPY A: B: The display Text generated by the computer that appears on its display is presented in the type face below: Format complete System transferred PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 6
1.5 Web camera ........................1-19 1.6 Power Supply ........................1-20 1.7 Batteries ........................1-21 1.8 AC Adapter ........................1-23 1.9 Stylus pen ........................1-25 1.10 USB Type-C Adapter ....................1-28 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
This model belongs to a convertible type PC and realizes 3 styles, clamshell, flat and tablet, at use. The following shows each unit position and system unit configuration of this model. Front view Figure 1-1 Appearance and each unit position (1) PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 16
1 Hardware Overview Back view Left side Right side Figure 1-1 Appearance and each unit position (2) [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 17
1 Hardware Overview Underside Figure 1-1 Appearance and each unit position (3) PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 22
Memory module in 16GB, 32GB or 64GB size of LDDR4-4266 or LDDR5-5200 mounted on the board. SSD The computer is equipped with one of the following storage devices: M.2 PCIe SSD: 256GB/512GB/1T/2T/512G Optane/1T Optane [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 23
Some models support Face Recognition by Windows Hello. Sound system The sound system is equipped with the following features: Stereo speakers: harman/kardon Built-in microphone: Two microphones (beam foaming/noise cancellation) Headphone/Mic combo-jack PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 24
3D Acceleration sensor Finger print sensor: on SecurePad (BTO) IR Camera (Face Recognition Sensor) (BTO) GPS (for 5G/LTE models (BTO)) Gyro sensor EC/KBC: MEC1703 1-10 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Outline Width (mm) 22.00±0.15 Height (mm) 2.25 Max Length (mm) 80.00±0.15 Weight (g) 8.0 Max. Data transfer speed Maximum Data 1,800MB/s 2,000MB/s 2,000MB/s Read Maximum Data 600MB/s 1,200MB/s 1,600MB/s Write 1-11 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 26
(Intel® Optane™ Memory H10 Series) Part code G8BC000CB510 G8BC000CB1A0 Capacity 32GB+512GB 32GB+1TB Outline Width (mm) Height (mm) Length (mm) Weight (g) Data transfer speed Maximum Data Read Maximum Data Write 1-12 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 27
Height (mm) 2.38 (Max) Length (mm) 80.0±0.15 Weight (g) 6.0 (Max) 9.0 (Max) Data transfer speed Maximum Data 3,100MB/s 6,900MB/s 7,000MB/s Read (Sequential) Maximum Data 2,000MB/s 5,000MB/s 5,100MB/s Write (Sequential) 1-13 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 28
G8BC000CJ511 Capacity 256GB 512GB Outline Width (mm) 22.00±0.15 Height (mm) 2.23 (Max) Length (mm) 80.0±0.15 Weight (g) Data transfer speed Maximum Data 2,300MB/s 2,500MB/s Read Maximum Data 1,200MB/s 2,100MB/s Write 1-14 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
The followings show the layout of the US keyboard and specifications of UK/JP/US keyboards. As for the layout of UK/JP keyboards, see Appendix E. As for the key matrix, see Appendix D. Figure 1-4 US keyboard layout 1-15 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Chicony G9BC0006G110 8M AF Size [mm] (Max) 26.4 × 24.12 × 4.1mm Weight [g] 0.67 ± 0.03 Image transfer rate 3,264 x 2,448: 30fps (fps) (Max) Focus Distance 10 cm~infinity 1-19 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 34
5. Turns the power supply on and off. 6. Provides more accurate detection of a low battery. 7. Calculates the remaining battery capacity. 8. Controls the transmission of the status signal of the main battery. 1-20 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
The main battery pack is the computer’s main power source when the AC adaptor is not attached. The main battery maintains the state of the computer when the computer enters in sleep mode. 1-21 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
When turning off the power in being charged fully, the preservation time is as follows. Table 1-8 Data preservation time Preservation time Type of battery Sleep Shutdown/Hibernation Main battery (4Cell,53Wh) About 5 days About 50 days 1-22 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
G71C000N1110 (2-pin) G71C000N2110 (3-pin) Power Input voltage 100V/240V Input frequency 50Hz to 60Hz Output voltage Output current 3.25A Dimension (mm) 63(W) x 63(L) x 28(H) (Typ.) Cable length (mm) 1800(±50) 1-23 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 38
1 Hardware Overview Rev.02 Item Specifications Maker Lite-ON Parts code G71C000MR110 (2-pin) G71C000MS110 (3-pin) Power Input voltage 100V/240V Input frequency 50Hz to 60Hz Output voltage Output current Dimension (mm) Cable length (mm) 1-24 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Up to 4,096 level resolution (depends on touch IC’s F/W setting) Returning time 5±30% from sleep [ms] Shifting time to Approximately 10 minutes sleep Length (mm) 127.2 Weight(g) 6.4±0.5 (excluding battery) 1-25 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 40
AAAA dry cell AAAA dry cell Before you handle the battery, read carefully the following instructions to avoid potential hazards that could cause bodily injury, property damage, or damage the product 1-26 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 41
Never leave the battery in the product for a long time Never leave the battery in the product for a long time if it is not in use. Failure to do so could possibly damage your product. 1-27 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
The following table shows the USB Type-C adapter specifications. Table 1-11 USB Type-C adapter specifications Item Specifications Maker Goodway Appearance USB-C TO VGA/LAN ADAPTER Specifications G83C000LP110 Parts code VGA/LAN/USB Type-C port (Power Delivery Charging) Functions 1-28 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
15. Fingerprint sensor 16. Web camera 17. HDMI port 18. USB Type-C adapter The Test Program operations are described in Chapter 3. Detailed procedures for replacement are described in Chapter 4. PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 48
There are following two types of connections in the figure of board and module connection in this chapter. (1) Cable connection is described with lines in the figure. (2) Pin connection is described with arrow in the figure. < Sample figure of connection > [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Make sure that Toshiba Windows is installed on the hard disk. Non-Windows operating systems can cause the computer to malfunction. Make sure all the optional equipment is removed from the computer. PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 50
Perform the Display Troubleshooting Procedures in section 2.9. If the “Password=” message appears, type the password. Perform the SSD Is Windows OS loaded? Troubleshooting Procedures in section 2.6. Figure 2-1 Troubleshooting flowchart (1/2) [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 51
Confirm on which test the error Is an error detected during was detected and perform the the running test? appropriate procedures. System can work without problem. Figure 2-1 Troubleshooting flowchart (2/2) PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 52
13. If an error is detected on the Sound, perform the Sound Troubleshooting Procedures in Section 2.15. 14. If an error is detected on the Memory media (SD Card) Slot, perform the Memory media (SD Card) Slot Troubleshooting Procedures in Section 2.16. [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 53
17. If a malfunction is detected on the HDMI port, perform the HDMI port Troubleshooting Procedures in Section 2.19. 18. If a malfunction is detected on the USB Type-C adapter, perform the USB Type-C Adapter Troubleshooting Procedures in Section 2.20. PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Procedures as instructed. The procedures described in this section are: Procedure 1: Power Status Check Procedure 2: Error Code Check Procedure 3: Connection Check Procedure 4: Charging Check Procedure 5: Replacement Check [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 55
The AC adaptor must be connected in order to recharge the battery. No light Indicates the AC adaptor is not connected In the case of other than the above, there might be a problem on the battery. PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 56
Use a supplied AC adapter, G71C000LR210 (2-pin) or G71C000LS210 (3-pin). ・ Use only the Type-C adapter comes with the PC or Dynabook authorized adapter. When the DC IN/Battery indicator is still flashing, go to Procedure 2. When the DC IN/Battery indicator is turned off, go to Procedure 3.
Page 57
On for half second Interval between data bits Off for half second The error code begins with the least significant digit. Example: Error code A2h (Error codes are given in hexadecimal format.) 2-11 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 58
PCNFBV signal deasserted when BVON signal is output) asserted B system power supply OFF Power off steady state & steady output error (With PCNFBV signal asserted when BVON signal is output) deasserted. 2-12 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 59
5G3VON signal asserted Steady-state output error at Power off steady state & power off of 5G power supply When the 5G3VPG signal is asserted with the (With output) 5G3VON signal deasserted 2-13 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 60
To disassemble the computer, follow the steps described in Chapter 4, Replacement Procedures. Check 1 AC adapter may be faulty. Replace the AC adapter with a new one. If the problem still occurs, perform Check 2. 2-14 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 61
Battery pack may be faulty. Replace it with a new one. If the problem still occurs, perform Check 4. Check 4 System board may be faulty. Replace it with a new one. 2-15 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Procedure 1 and continue with the other procedures as instructed. The procedures described in this section are: Procedure 1: Message Check Procedure 2: Diagnostic Test Program Execution Check Procedure 3: Replacement Check 2-16 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
F2 to display the BIOS setup screen. Set the correct boot device and repeat Procedure 1. If any error occurs or any device is not installed, go to Procedure 2. 2-17 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Before exchanging a system board, write down the DMI information, and after the exchange, register the DMI information to the new system board according to Chapter 3. At that time, update the BIOS and EC/KBC to the latest ones. 2-18 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
2.5.2 Procedure 2 Replacement Check of USB unit Check 1 USB unit may be faulty. Replace it with a new one. If the problem still occurs, go to Procedure 3. 2-19 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 66
Disassemble the computer following the steps described in Chapter 4, Replacement Procedures, and replace the system board with a new one. System board CN4800 Type-C connector CN4821 USB unit Type-C connector CN4850 Type-A connector 2-20 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Make sure the M.2 SSD is connected firmly to the connector on the system board. System board CN1910 If the connection is loose, reconnect it firmly and repeat Procedure 1. If there is still an error, go to Procedure 3. 2-21 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Chapter 4, Replacement Procedures and check the operation. If the problem still exists, perform Check 2. Check 2 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. 2-22 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Chapter 4, Replacement Procedures. If the problem still occurs, perform Check 3. Check 3 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. 2-23 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
CN9510 Click pad I/F System board Touch Pad CN9550 KB fingerprint sensor I/F FP FFC (Only for Secure pad) If the problem still occurs, go to Procedure 3. 2-24 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Chapter 4, Replacement Procedures. If the problem still occurs, perform Check 2. Check 2 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. 2-25 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Diagnostics, for more information on how to perform the test program. If any error occurs during the test program, go to Procedure 3. If not, both the LCD should work properly. 2-26 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 73
If the problem still exists, perform Check 4 Check 4 The display controller on the system board may be damaged. Replace the system board with a new one. 2-27 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Chapter 4, Replacement Procedures. If the problem still exists, perform Check 3. Check 3 System board may be faulty. Replace it with new one following the instructions in Chapter 4, Replacement Procedure. 2-28 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
USB board/LTE board or USB FPC may be faulty. Replace it with a new one. If the problem still occurs, perform Check 7. Check 7 System board may be faulty. Replace it with a new one following the instruction in Chapter 4, Replacement Procedure. 2-29 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
If the cables are not connected properly, connect them firmly to the correct position and perform Procedure 1. If the problem still occurs, go to the procedure 3. 2-30 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Check 2 Wireless LAN/Bluetooth Combo module or System board may be faulty. Since the Combo module is installed on the system board directly, replace the system board with a new one. 2-31 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
This procedure checks if the 5G or LTE module can be found on the Windows application. Refer to Chapter 3 for more information about that. If any problem is found on that check, perform Procedure 2. 2-32 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 79
If the problem still exists, 5G/LTE module, antenna or system board may be faulty. Refer to Chapter 4, Replacement Procedures, for instructions on how to disassemble the computer and then perform the following checks: 2-33 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 80
Antennas may be defective or damaged. Replace them with new ones and perform Procedure 1 again. If the problem still exists, perform Check 3. Check 3 System board may be defective or damaged. Replace it with a new one. 2-34 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Make sure that WiGig module is firmly connected to the connector on the system board. If the connection is loose, connect it firmly and perform Procedure 1. If the problem still occurs, perform Check 2. 2-35 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 82
WiGig antenna may be faulty. Replace it with a new one. If the problem still occurs, perform Check 3. Check 3 The system board may be faulty. Replace it with a new one. 2-36 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
If built-in microphone does not work properly, reconnect it surely following the steps in Chapter 4, Replacement Procedures. If there is still problem, perform Check 3 of Procedure 3. 2-37 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 84
Replacement Procedures. If the problem still occurs, perform Check 4. Check 4 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. 2-38 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Memory media (micro SD Card) may be faulty. Replace it with a new one. If the problem continues, perform Check 3. Check 3 System board may be faulty. Replace it with a new one following the step in Chapter 4 Replacement Procedures. 2-39 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
To use the fingerprint functions, registration of your fingers on “Windows Hello” after setting the Windows sign-in password and PIN. 2.17.2 Procedure 2 Registration of Pin and fingerprint As for the registration of the fingerprint information, refer to the User’s manual. 2-40 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
If you fail this authentication continually five times, you cannot use the fingerprint authentication. In that case, type the password to sign in to Windows. If you want to type the password on the finger print authentication screen, press BACKSPACE. 2-41 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 88
The Secure pad may be faulty. Replace it with a new one. If the problem still occurs, perform Check 4. Check 4 The system board may be faulty. Replace it with a new one. 2-42 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Procedure 1 again. If the problem still occurs, perform Check 3 Check 3 System board may be faulty. Replace it with a new one. 2-43 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Check the HDMI port condition following the steps below. For details of each operation, refer to User’s manual. 1. Connecting to the computer 2. Switching the sound output from computer’s speakers to TV 3. Switching the image output from computer’s screen to TV 2-44 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Check 5. Check 5 The system board may be damaged. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures, and replace it with a new one. 2-45 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Check 2. Check 2 USB Type-C adapter may be faulty. Replace it with a new one. If the problem still exists, check the PC condition. 2-46 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Check the setup condition of the external display and returns to Procedure 1. As for the setting of the external display, refer to the instruction manual for the TV. If the problem still exists, perform Check 3. 2-47 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
LAN cable may be faulty. Replace it with a new one. If the problem still occurs, perform Check 3. Check 3 USB Type-C adapter may be faulty. Replace it with a new one. If the problem still exists, check the PC condition. 2-48 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 96
3 Tests and Diagnostics 3-ii [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 97
SETUP ........................3-26 3.16.1 Function Description ................3-26 3.16.2 Accessing to the SETUP Program ............. 3-32 3.17 Sensor calibration tool ..................... 3-41 3.17.1 Outline ....................3-41 3.17.2 Preparation ..................3-42 3-iii PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 98
3 Tests and Diagnostics 3.17.3 Start and Test procedure ..............3-43 3.17.4 Result ....................3-47 3.17.5 Log ..................... 3-48 3.17.6 How to terminate this tool ..............3-50 3-iv [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
There are programs to write the HW information and to check the function of HW components in the diagnostic test. You will need the following equipment to perform some of the diagnostic test programs. PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Check the [Advanced] – [System Configuration] in the BIOS setup screen. You can see [Battery disconnect] item. Connect the AC adapter and execute it to set the “Battery Off mode” state. [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Then repeat from Step 2. Procedure 2: Check of hardware information The program checks and displays the hardware information such as HDD and SSD of the computer. PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 102
Does it update EC/KBC (Vx.xx->Vx.xx)? (Y or N), or press [Enter] (Selection=Y)? When the message above appears, pressing ENTER will start EC/KBC update. Then, since the computer reboots automatically, repeat from Step 2. If the update is not needed, press N. [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 103
To start the Heatrun Test, press 2 and Enter. To start the Main Test Menu, press 3 and Enter. NOTE: Before starting the diagnostics, be sure to that all the cables are connected firmly. PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
**** Warning : Update DMI really? (y/n) *** The PC will restart. Press F12 and select the USB memory as the boot device. Then the following screen will appear. (Screen sample) [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 105
・Cancel : ends this program. When Cancel button is pressed, the PC will restart. Press F12 and select the USB memory as the boot device. Then this program will return to the test program screen. PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
2. Sequential Read Test Refer to Subtest 1 of 3.7 Hard disk/SSD Test 3. V-RAM Memory test Refer to Subtest 2 of 3.6 Memory Test To terminate the program, press SHIFT + Q. [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
ENTER. The following table shows the subtests names of each test. Table 3-1 Subtest names (1/2) TEST No TEST NAME SUBTEST No SUBTEST NAME MEMORY Main Memory Test V-RAM Memory Test PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 108
The setting of Yes/No can be changed by pressing ENTER. Error Stop Select Yes: if any error occurs during the test, the test is suspended and key input is required. 3-10 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 109
The subtest is started in the conditions selected above by entering ENTER. For more information about the tests in the Main Test Menu and other tests, refer to Section 3.6 or later. 3-11 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
If the test data and read data is not the same, this test displays a message of the data comparing error and writes the information to the text file (errorlog.txt) as an error log. As for the details of the error log, refer to 3.12 Log utility. 3-12 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
3. LBA 86 (=22 + 64) (by 512-byte) 4. LBA 45 (=86 - 41) (by 512-byte) At Step 1, this test starts from the LBA 63 and writes the test data by 512-byte. 3-13 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 112
) If the test data and read data is not the same, this test displays a message of “Data Compare error” and writes the information to the text file (errorlog.txt) as an error log. (1 LBA (512-byte)) Number of Passes LBA No. 000000・・・・・・・・・・・・ (UINT32) (UINT32) 3-14 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 113
If any errors occur at comparing, this test displays the message “ ” and Compare error writes the information to the text file (errorlog.txt) as an error log. As for the details of the error log, refer to 3.12 Log utility. 3-15 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
B (right click button), and displays the information in real time. To back to the Keyboard test menu screen, press the button A and B. (Displayed information) [X: xxxx] [Y: xxxx] [Button A : x] [Button B : x] 3-16 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
This test displays the white screen for 5 sec. and then the black screen for 5 sec. After that, this test backs to the LCD Panel test menu screen automatically. 3-17 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 116
This test displays the white screen and changes the LCD brightness to the maximum, middle and low setting in order with 5-sec intervals. After that this test backs to the LCD Panel test menu screen automatically. 3-18 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
The test starts by pressing ENTER. The test gets the charging status of the mounted battery pack and displays the message. To back to the main menu screen, press ENTER. 3-19 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
OK appears in the display if the test ends without an error. NG appears in the display if an error is found during the test. To back to the main menu screen, press ENTER. 3-20 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
・Write..Write value(Memory Test/HDD Test) ・Read..Read value(Memory Test/HDD Test/ Battery Charge Test) To clear the log information, press C. To back to the main menu screen, press ENTER. 3-21 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Bluetooth function is mounted. <How to display PC system information screen> 1. Click Start button. 2. Click [dynabook サービスステーション(dynabook Service Station)] -> [シ ステム情報(System information)]. Check the content of “ネットワーク(Netwrok)”. If “Wireless**” appears in the screen, it means the wireless module has been recognized.
In the case of no-antenna connection If AP should be ready but no AP point appears, any problem might occur on the wireless module or on the antenna connection. 3-23 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Since there is no 5G/LTE test in the test program for maintenance, check if the 5G or LTE module is recognized by the PC on Windows. Start the device manager. If “EMxxxx” is shown under “Network adapters”, the module is recognized. (Sample of a module name) 3-24 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
3 Tests and Diagnostics 3.15 Sound Test Since there is no sound test in the test program for maintenance, check the functions related to sound on Windows with music data, etc. 3-25 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
-Clear Secure Boot keys (*1) -Clear System data (*1) Clear Fingerprint data (*1) (*2) Disable Block Sid -Clear TPM Owner USB provisioning of AMT (*2) Device Access Control (*1) Device Boot Control (*1) 3-26 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 125
*1: This item is shown only when a supervisor password is set. *2: This item is shown only on some models. *3: This item is shown only when both the User and Master HDD Password. 3-27 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 126
Save Changes and Power Off Rev.02 < PDA3* > Main menu System Time System Date CPU Type CPU Speed HDD/SSD Total Memory Size System BIOS Version EC Version PDC Version Mac Address (*4) Language 3-28 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 127
Wake-up on LAN Panel Open – Power On Power on by AC Intel Turbo Boost Technology Intel Display Power Management Keyboard Backlight Control Mode Backlight Lighting Time Thermal Control Alternative Mode 3-29 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 128
Boot Option #2 Boot Option #3 Boot Option #4 Priority for devices Add New Boot Option Exit menu Exit Saving Changes Exit Discarding Changes Load Setup Defaults Save Changes and Power Off 3-30 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 129
*2: This item is shown only on some models. *3: This item is shown only when both the User and Master HDD Password. *4: This item is shown only when a specified condition is configured. 3-31 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
3 Tests and Diagnostics 3.16.2 Accessing to the SETUP Program Turn on the power while pressing F2 of the keyboard. The following display appears. < PDA1* > Main menu screen Security menu screen 3-32 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 131
3 Tests and Diagnostics Power Management menu screen Advanced menu screen 3-33 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 132
3 Tests and Diagnostics Boot menu screen Exit menu screen 3-34 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 133
3 Tests and Diagnostics Rev.02 < PDA3* > Main menu screen Security menu screen 3-35 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 134
3 Tests and Diagnostics Rev.02 Power Management menu screen Advanced menu screen 3-36 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 135
3 Tests and Diagnostics Rev.02 Boot menu screen Exit menu screen 3-37 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 136
3 Tests and Diagnostics Rev.02 MEBx menu screen 3-38 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 137
The Factory Preset Configuration When you access SETUP, the current configuration is displayed. 1. To show the factory preset configuration, press F9. 2. To accept the default settings, press Y. 3-39 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 138
3 Tests and Diagnostics How to change setup Options Since a help is displayed on the right-hand side of each menu screen, refer it before change. 3-40 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
● Replacing of the chassis or keyboard ● Disassembling/assembling of PC including removal and attachment of the sensor harness ● Replacing of the front Web camera The following explains how to operate the tool. 3-41 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
3 Tests and Diagnostics Rev.02 3.17.2 Preparation Unzip the following file and copy all the contents to a USB memory. < PDA1* > ・ Diamond10SensorCalibrationToolV***.Zip < PDA3* > ・ Diamond30SensorCalibrationToolV***.Zip 3-42 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Procedure 5: Change the PC to be tested into Tablet style and lay it on the horizontal and stable table as the screen faces up. Procedure 6: Touch “Start Test Now“ button to start the test. 3-43 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 142
Touch “Setup OK” button when the PC is ready. The Gyro calibration is performed automatically. Power button When the Gyro calibration test is completed, the screen Step 1 of Acceleration calibration test will appear. 3-44 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 143
“STEP 1 XXXXXX” Step 2: Make the side with the power button bottom side slowly. When is displayed, go to the next step. “STEP 2 XXXXXX” 3-45 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 144
“STEP 3 XXXXXX” Step 4: Lay the PC as the display faces up. When is displayed, the Acceleration calibration test is “STEP 4 XXXXXX” completed. 3-46 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
If this test ends successfully, “PASS” is displayed. Tap “OK” button to back to the start screen. FAIL If any problem occurred, “FAIL” will be displayed. Tap “OK” button to back to the start screen. 3-47 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
2. Touch “Save” on “Log Information Display” to display “Output a LogFile to external”. 3. Select a folder to save the information file and touch “Save”. The log file named “wintndx.log” or “wintndx64.log” will be output to (saved in) the specified folder. 3-48 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 147
3 Tests and Diagnostics Specify the output folder. Output the log file. 3-49 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
3 Tests and Diagnostics 3.17.6 How to terminate this tool Select “Close” on the tart screen. The computer is powered off. 3-50 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
(Micro SD card) must be removed. When repairing an FRU that is the potential cause of a computer fault, use the chart to determine the order in which FRUs need to be removed. PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 156
(MOTHER COOL SHEET(H10) BOARD ASSY) COOL SHEET(J10) Quantity Parts List ITEM PART NAME ITEM No 5G/LTE 5G/LTE (PDA1*) (PDA3*) CLICK PAD AL TAPE CLICK PAD D TAPE PAD MIMO2 ANTENNA 4-2 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 157
(Note) COVER ASSY (for PDA3*) will be used to Non 5G/LTE (PDA1*) model. Parts List Quantity ITEM PART NAME ITEM No 5G/LTE 5G/LTE (PDA1*) (PDA3*) KEYBOARD INSU KB LOW KEYBOARD INSU KB LOW 5G FIN CUSHION COV PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 158
D TAPE TP LS L D TAPE TP LOW L D TAPE TP SIDE R D TAPE TP LS R D TAPE TP LOW R D TAPE TP L CE 4-4 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 159
D TAPE SEPA (201), D TAPE SEPA (211), D TAPE TP SIDE L, D TAPE TP LS L, D TAPE TP LOW L, D TAPE TP SIDE R, D TAPE TP LS R, D TAPE TP LOW R and D TAPE TP L CE. PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 160
M2.56B FLAT HEAD M2.54B FLAT HEAD SCREW M2.5X4 FLAT HEAD SCREW M2.5X6 FLAT HEAD M2.56B FLAT HEAD SCREW M2X4 S-THIN M24C S-THIN HEAD M2.5x4B TORX HEAD SCREW M2.5X4 TORX HEAD 4-6 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 161
6) Some parts inside the computer, such as the CPU and cooling module, become very hot during operation. Conduct repair work after they have cooled. Be careful around the CPU and cooling module to avoid burns. PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 162
11. Be careful that not to break the computer casing and harnesses by the removed parts. 12. After replacing an FRU, check that the computer and replaced part operate correctly. 4-8 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 163
Pull the cable to ensure that it is securely connected. Normal pin connectors are used for all other cables. Simply pull out or push in these connectors to disconnect or reconnect. Pressure plate connector Spring connector Back flip connector PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 164
When checking the computer moved correctly, do not put the excessive power on the hinges and computer itself. After installing FRUs, check that the computer operates correctly. 4-10 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 165
Air-ionizers in highly static sensitive areas Antenna coaxial cable disconnector One T8-size torx screwdriver (star screwdriver) corresponding to tamper-proof pin (only for JP 5G/LTE model) (for TORX HEAD screws removing/fixing the BASE ASSY) PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-11...
Page 166
Press along the axis of the screwdriver while turning the screw. This is because the contact area between the screw and driver is less than for a pan head screw (standard pan-shaped screw head). 4-12 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 167
U: Other screws (Unique screws: pan head, stud, etc.) Example: B6 ... 6mm BIND screw Screw color/material B: Black/Nickel C: Silver/Non-Hexavalent Chromate U: Other screws (Unique screws: such as stud, etc.) PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-13...
To install the SIM Card, follow the steps below and refer to Figure 4-1. 1. Set the SIM card on the SIM card tray. 2. Set the SIM card tray (with the SIM card) into the SIM card slot. 4-14 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
To install the Micro SD Card, follow the steps below and refer to Figure 4-2. 3. Insert the Micro SD card into the slot and push it carefully to ensure a firm connection. PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-15...
When the color of the computer is black, fix the BASE ASSY or BASE LTE ASSY with the black nickel screws. 5. Remove the BASE ASSY or BASE LTE ASSY while releasing the latches. 4-16 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 171
4.4 BASE ASSY 4 Replacement Procedures < non 5G/LTE model > BASE ASSY Figure 4-3 Removing the BASE ASSY (1) PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-17...
Page 172
4 Replacement Procedures 4.4 BASE ASSY < 5G/LTE model > BASE LTE ASSY Figure 4-4 Removing the BASE ASSY (2) 4-18 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 173
NOTE: When replacing the BASE ASSY or BASE LTE ASSY with a new one, stick new SQUARE CUSHION (351) and CAUTION SEAL to the BASE ASSY or BASE LTE ASSY in place. PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-19...
Page 174
Parts List ITEM PART NAME ITEM No 5G/LTE 5G/LTE (PDA1*) (PDA3*) BASE ASSY (for PDA1*) BASE ASSY (for PDA3*) BASE ASSY BASE LTE ASSY SQUARE CUSHION (351) 90,91 CAUTION SEAL 4-20 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 175
3. Remove the following screws and the BATTERY PACK. M24C 2 S-THIN HEAD screw CAUTION: The replaced battery must be disposed according to the laws and ordinances of your local authority. PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-21...
4 Replacement Procedures 4.5 BATTERY PACK M2x4C S-THIN HEAD INSU SQUARE M2x4C S-THIN HEAD BATTERY PACK BATTERY HARNESS CN8021 Figure 4-5 Removing the BATTERY PACK 4-22 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 177
1. Set the BATTERY PACK to the COVER ASSY and secure it with the following screws. M24C 2 S-THIN HEAD screw 2. Connect the BATTERY HARNESS to the connector CN8021 on the SYSTEM BOARD. 3. Stick the INSU SQUARE in place. PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-23...
2. Disconnect the FP FFC (finger print sensor model) and CPAD FFC from the connectors CN9550 and CN9510 on the SYSTEM BOARD. CPAD FFC Mark CN9510 CN9550 FP FFC Figure 4-6 Removing the SPEAKER (1) 4-24 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 179
3. Open the INSU KB LOW or INSU KB LOW 5G. INSU KB LOW or INSU KB LOW 5G INSU KB LOW 5G has another tab. Open it together. Figure 4-7 Removing the SPEAKER (2) PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-25...
Page 180
5. Remove the SPEAKER or SPEAKER 5G (left and right) from the slots of the COVER ASSY. SPEAKER or SPEAKER 5G CN6290 SPEAKER HARNESS Figure 4-8 Removing the SPEAKER (3) 4-26 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 181
CN9550 and CN9510 on the SYSTEM BOARD. 5. Connect the marked side of the FP FFC (finger print sensor model) and CPAD FFC to the connectors on the CLICK PAD. PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-27...
Page 182
3. Remove the following screw and disconnect 5G MODULE from the connector CN2610 or LTE MODULE from the connector CN2600 on the SYSTEM BOARD. M22.3C S-THIN HEAD screw 1 4-28 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 183
< LTE MODULE > (Siera) (Quectel) 5G MAIN ANTENNA Cable (red) 5G AUX ANTENNA Cable (blue) M2x2.3C S-THIN HEAD INSU SQUARE INSU SQUARE (271) Figure 4-9 Removing the 5G/LTE MODULE PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-29...
Page 184
③ Stick the MIMO2 cable (black) to the Do not pass the cable on INSU. To make the space for MIMO1 cable, the rib. stick it along to the AUX cable (blue). 4-30 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 185
System board corner. ③ Pass the MAIN cable (red) on the AUX, MIMO2 and MIMO1 cables. ① Fix the cables with INSU. ② Fix the cables with INSU KB LOW 5G. PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-31...
Page 186
LTE module. ② Pass the MAIN cable (red) under the System board corner first. Then hook it to the boss. ③ Stick the MAIN cable (red) to the INSU. 4-32 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 187
② Pass the AUX cable (blue) under the System board corner first. Then hook it to the boss. Quectel LTE Module ③ Stick the AUX cable (blue) to the INSU. PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-33...
Page 188
System board corner first. Then hook it to the boss. ③Stick the MAIN cable (red) to the INSU. ①Fix the cables with the INSU. ②Fix the cables with the INSU. 4-34 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 189
3. Stick the INSU SQUARE to the 5G MODULE or LTE MODULE NOTE: (5G model) Stick the INSU SQUARE as shown below; To the module edge INSU SQUARE To the module edge PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-35...
Page 190
1. Press the latch to the arrow direction to release. 2. Pull up the GASKET HOLDER. 3. Release the latch and remove the GASKET HOLDER. ② ① ③ GASKET HOLDER Latch Figure 4-10 Removing the 5G/LTE ANTENNA (1) 4-36 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 191
4. Remove the 5G ANTENNA SPACERs and the INSU SQUAREs. Turn up the INSU ANT HOLD. NOTE: Do not reuse the removed INSU SQUAREs. Be sure to use new ones. Figure 4-11 Removing the 5G/LTE ANTENNA (2) PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-37...
Page 192
(LTE model) Remove the MAIN ANTENNA and AUX ANTENNA. NOTE: Do not reuse the removed ANTENNAs. Be sure to use new ones. < 5G model > < LTE model > Figure 4-12 Removing the 5G/LTE ANTENNA (3) 4-38 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 193
(LTE model) Stick the MAIN ANTENNA and AUX ANTENNA to the COVER ASSY in place and arrange the cables in place. 2. Stick the 5G ANTENNA SPACERs and the INSU SQUAREs in place. Close the INSU ANT HOLD. PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-39...
Page 194
4 Replacement Procedures 4.8 5G/LTE ANTENNA NOTE: Stick the ANTENNAs and arrange the cables according to the order and the steps below; < 5G model > 4-40 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 195
Pass the cable in along the rib. the palm rest side Fix the cable with INSU ANT HOLD Fix the cable with Do not pass on INSU SQUARE the PAD rib PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-41...
Page 196
Prepare required parts in advance, when replacing the following items. Quantity Parts List ITEM PART NAME ITEM No 5G/LTE 5G/LTE (PDA1*) (PDA3*) MAIN ANTENNA AUX ANTENNA 5G/LTE MIMO1 ANTENNA ANTENNA MIMO2 ANTENNA INSU SQUARE(111) 4-42 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 197
NOTE: Do not touch the center portion of the FANs. M2x4C S-THIN HEAD CN3380 M2x4C S-THIN HEAD FAN L HARNESS FAN R (FAN1) FAN R HARNESS FAN L (FAN2) CN3390 Figure 4-13 Removing the FAN PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-43...
Page 198
4. Set the FAN L to the COVER ASSY and secure it with the following screws. M24C 2 S-THIN HEAD screw 4. Connect the FAN L HARNESS to the connector CN3390 on the SYSTEM BOARD. 4-44 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 199
1. Remove the following screw and disconnect the SSD from the connector CN1900 on the SYSTEM BOARD. M22.5 1 FLAT HEAD DANTUKI screw M2x2.5 FLAT HEAD DANTUKI CN1900 Figure 4-14 Removing the SSD PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-45...
Page 200
To install the SSD, follow the steps below and refer to Figure 4-14. 1. Insert the SSD to the connector CN1900 on the SYSTEM BOARD. 2. Secure the SSD with the following screw. M22.5 1 FLAT HEAD DANTUKI screw 4-46 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 201
NOTE: When removing the HEAT SINK, be sure to remove the screws in the reverse order of the number marked on the HEAT SINK. M2x2.3C S-THIN HEAD M2x2.3C S-THIN HEAD HEAT SINK Figure 4-15 Removing the HEAT SINK PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-47...
Page 202
3. Set the HEAT SINK in place and secure it with the following screws. M22.3C 4 S-THIN HEAD screw NOTE: When securing the HEAT SINK, be sure to secure the screws in the order of the number marked on the HEAT SINK. 4-48 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 203
(MBR-DPK) must be written on the SYSTEM BOARD. 4. When removing/installing the SYSTEM BOARD, handle with both hands and do not handle with the handling prohibition area (refer to the figure below). PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-49...
Page 204
4. Release the lock bar and disconnect the LCD HARNESS from the connector CN5390 on the SYSTEM BOARD. 5. Disconnect the REAR CAMERA FPC from the connector CN9560 on the SYSTEM BOARD. 4-50 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 205
W-LAN ANTENNA CABLE (white) INSU Lock bar LCD HARNESS REAR CAMERA FPC (Connected to CN5390) (Connected to CN9560) CAMERA HARNESS (Connected to CN9540) Figure 4-16 Removing the SYSTEM BOARD (1) PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-51...
Page 206
4.12 SYSTEM BOARD 6. Remove the following screws and the SYSTEM BOARD. M24C 2 S-THIN HEAD screw M2x4C S-THIN HEAD SYSTEM BOARD Figure 4-17 Removing the SYSTEM BOARD (2) 4-52 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 207
When replacing the SYSTEM BOARD with a new one, stick the INSU SQUARE (321), COOL SHEET (H10), COOL SHEET (J10), SQUARE CUSHION (161), INSU PCB SSD, INSU PCB PIPE L and INSU PCB PIPE R to the SYSTEM BOARD in place. PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-53...
Page 208
(PDA1* and PDA3* models) INSU PCB SSD or INSU PCB SSD 30 INSU PCB PIPE R or INSU PCB PIPE L or INSU PCB PIPE R 30 INSU PCB PIPE L 30 4-54 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 209
2. Connect the REAR CAMERA FPC to the connector CN9560 on the SYSTEM BOARD. 3. Connect the LCD HARNESS to the connector CN5390 on the SYSTEM BOARD and fix it with the lock bar. PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-55...
Page 210
Prepare required parts in advance, when replacing the following items. Quantity Parts List ITEM PART NAME ITEM No 5G/LTE 5G/LTE (PDA1*) (PDA3*) MOTHER BOARD ASSY SYSTEM SQUARE CUSHION (161) BOARD (MOTHER COOL SHEET(H10) BOARD ASSY) COOL SHEET(J10) 4-56 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 211
2. Peel off the CLICK PAD from the COVER ASSY. NOTE: Do not reuse the removed AL TAPE and CLICK PAD. Be sure to use new ones. AL TAPE CLICK PAD Figure 4-18 Removing the CLICK PAD PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-57...
Page 212
1. When replacing the CLICK PAD with a new one, replace the D TAPE PAD on the COVER ASSY with a new one in place. CLICK PAD D TAPE PAD AL TAPE 2.(5G model) Stick a new MIMO2 ANTENNA in place. 4-58 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 213
Prepare required parts in advance, when replacing the following items. Rev.02 Quantity Parts List ITEM PART NAME ITEM No 5G/LTE 5G/LTE (PDA1*) (PDA3*) CLICK PAD AL TAPE CLICK PAD D TAPE PAD MIMO2 ANTENNA PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-59...
Page 214
W-LAN MAIN ANTENNA (white cable) M2x4C S-THIN HEAD CORNER CAP R INSU INSU W-LAN MAIN ANTENNA CABLE (white) W-LAN AUX ANTENNA CABLE (black) Figure 4-19 Removing the W-LAN ANTENNA (1) 4-60 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 215
6. Peel off the W-LAN AUX ANTENNA (black cable) from the CORNER CAP L. W-LAN AUX ANTENNA (black cable) W-LAN AUX ANTENNA CABLE (black) INSU M2x4C S-THIN HEAD CORNER CAP L INSU Figure 4-20 Removing the W-LAN ANTENNA (2) PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-61...
Page 216
4. Set the CORNER CAP R (W-LAN MAIN ANTENNA (white cable)) to the COVER ASSY and secure it with the following screw. M24C 1 S-THIN HEAD screw 5. Arrange the W-LAN ANTENNA CABLEs in place. 6. Close the INSUs. 4-62 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 217
4.14 W-LAN ANTENNA 4 Replacement Procedures NOTE: Arrange the W-LAN ANTENNA CABLEs as shown in the figure below. PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-63...
Page 219
1. Peel off the LID BOARD from the guides of the COVER ASSY. 2. Disconnect the LID HARNESS from the connector CN3291 on the LID BOARD. LID HARNESS LID BOARD CN3291 Guide Figure 4-21 Removing the LID BOARD PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-65...
Page 220
Prepare required parts in advance, when replacing the following items. Parts List Quantity ITEM PART NAME ITEM No 5G/LTE 5G/LTE (PDA1*) (PDA3*) LID BOARD LID BOARD D TAPE PCB LID 4-66 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 221
To remove the REAR CAMERA MODULE, follow the steps below and refer to Figure 4-22. 1. Open the INSU. 2. Remove the REAR CAMERA MODULE from the slot of the COVER ASSY. REAR CAMERA MODULE INSU Figure 4-22 Removing the REAR CAMERA MODULE PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-67...
Page 222
To install the REAR CAMERA MODULE, follow the steps below and refer to Figure 4-22. 1. Set the REAR CAMERA MODULE to slot of the COVER ASSY. 2. Close the INSU. 4-68 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 223
1. Remove the following screws and separate the LCD FAT ASSY and COVER ASSY. M2.54B 3 FLAT HEAD screw M2.5x4B FLAT HEAD M2.5x4B FLAT HEAD COVER ASSY LCD FAT ASSY Figure 4-23 Removing the LCD FAT ASSY/COVER ASSY PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-69...
Page 224
AL TAPE CLICK PAD COVER ASSY GASKET(R10) GASKET(T10) INSU KB LOW INSU KB LOW 5G FIN CUSHION COV (Note) COVER ASSY (for PDA3*) will be used to Non 5G/LTE (PDA1*) model. 4-70 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 225
NOTE: Do not reuse the removed INSU KB LOW or INSU KB LOW 5G. Be sure to use a new one. INSU KB LOW or INSU KB LOW 5G Figure 4-24 Removing the KEYBOARD (1) PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-71...
Page 226
M1.21.1B 63 S-THIN HEAD screw 3. Remove the KEYBOARD. NOTE: The KEYBOARD is very thin, so be careful of handling. M1.2x1.1B S-THIN HEAD KEYBOARD Figure 4-25 Removing the KEYBOARD (2) 4-72 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 227
NOTE: 1. Prepare INSU KB LOW for non 5G/LTE model, INSU KB LOW 5G for 5G and LTE model. < INSU KB LOW > < INSU KB LOW 5G > PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-73...
Page 228
Prepare the required parts in advance, when replacing the following items. Parts List Quantity ITEM PART NAME ITEM No 5G/LTE 5G/LTE (PDA1*) (PDA3*) KEYBOARD INSU KB LOW KEYBOARD INSU KB LOW 5G FIN CUSHION COV 4-74 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 229
NOTE: Do not reuse the removed HINGE CAP L ASSY and HINGE CAP R ASSY, be sure to use new ones. HINGE CAP R ASSY LCD LOW CAP ASSY HINGE CAP L ASSY Figure 4-26 Removing the LCD (1) PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-75...
Page 230
4 Replacement Procedures 4.19 LCD/CAMERA MODULE NOTE: Remove the HINGE CAP L ASSY, LCD LOW CAP ASSY and HINGE CAP R ASSY as shown in the figure below. 4-76 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 231
4. Release the LCD HARNESS and CAMERA HARNESS from the HINGE L/R ASSY. M2.5x2.5C S-THIN HEAD LCD HARNESS HINGE R ASSY M2.5x2.5C S-THIN HEAD CAMERA HARNESS HINGE L ASSY Figure 4-27 Removing the LCD (2) PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-77...
Page 232
7. Pull the D TAPE TP L CE to the arrow pointing. 8. Peel the 3AXIS SENSOR BOARD. 9. Close the SHUTTER SWITCH. 10. Peel the LCD UNIT slowly. NOTE: Remove the LCD UNIT as shown in the figure below. 4-78 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 235
D TAPE TP LOW R 3AXIS SENSOR BOARD LCD UNIT D TAPE TP LOW L D TAPE TP LS L D TAPE TP SIDE L Figure 4-28 Removing the LCD (3) PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-81...
Page 236
14. Disconnect the SENSOR HARNESS from the connector CN9860 on the 3AXIS SENSOR BOARD. 3AXIS SENSOR BOARD INSU SQUARE SENSOR HARNESS CN9860 TOUCH PANEL Lock bar HARNESS LCD HARNESS Connector Figure 4-29 Removing the LCD (4) 4-82 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 237
NOTE: Do not reuse the removed SQUARE CUSHION (431). Be sure to use new one. SHUTTER SWITCH CAMERA MODULE CAMERA COV ASSY Connector SQUARE CUSHION (431) CAMERA HARNESS Figure 4-30 Removing the CAMERA MODULE (1) PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-83...
Page 238
20. Remove the SQUARE CUSHION and the CAMERA HARNESS (FPC portion) from the LCD COVER ASSY. CAMERA HARNESS SQARE CUSHION D STICK TAPE Figure 4-31 Removing the CAMERA MODULE (2) 4-84 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 239
SEPA (201/211), D TAPE TP SIDE L, D TAPE TP LS L, D TAPE TP LOW L, D TAPE TP SIDE R, D TAPE LS R, D TAPE TP LOW R and D TAPE TP L CE to the LCD COVER ASSY in place. PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-85...
Page 240
3. Arrange the CAMERA HARNESS (FPC portion) to the LCD COVER ASSY stick the SQUARE CUSHION in place. NOTE: Stick the SQUARE CUSHION aligning to the parts as shown in the figure below. 4-86 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 241
11. Set the LCD UNIT on the LCD COVER ASSY in place. 12. Connect the SENSOR HARNESS to the connector CN9860 on the 3AXIS SENSOR BOARD. 13. Set the 3AXIS SENSOR BOARD to the LCD COVER ASSY in place. PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-87...
Page 242
20. Peel off the separator and set the HINGE CAP L ASSY to the LCD COVER ASSY while engaging the latches. 21. Peel off the separator and set the HINGE CAP R ASSY to the LCD COVER ASSY while engaging the latches. 4-88 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 243
D TAPE TP LS L D TAPE TP LOW L D TAPE TP SIDE R D TAPE TP LS R D TAPE TP LOW R D TAPE TP L CE PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-89...
Page 249
LCD cover before securing the module with screws. Do not force the module into place, because stress can affect its performance. Also, the panel’s polarized surface is easily scarred, so be careful when handling it. PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series (960-941) [CONFIDENTIAL] Maintenance Manual...
Page 250
4. If water or other liquid is left on the panel’s surface for a long period, it can change the screen’s tint or stain it. Be sure to quickly wipe off any liquid. [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 251
6. CMOS-LSI circuits are used in the module, so guard against damage from electrostatic discharge. Be sure to wear a wrist or ankle ground when handling the module. PORTÉGÉ 30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 252
8. Do not store the module at temperatures below specifications. Cold can cause the liquid crystals to freeze, lose their elasticity or otherwise suffer damage. 9. Do not disassemble the LCD module. Disassembly can cause malfunctions. [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 253
10. If you transport the module, do not use packing material that contains epoxy resin (amine) or silicon glue (alcohol or oxide). These materials can release gas that can damage the panel’s polarization. PORTÉGÉ 30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 254
Appendices Appendix A Handling the LCD Module [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 255
Table B-1 System board (FDIASY*/FDI3SY*) connectors and ICs (Front) ......B-1 Table B-2 System board (FDIASY*/FDI3SY*) connectors and ICs (Back) ......B-3 Table B-3 Sensor board (FDIASE*/FDI3SE*) connectors and ICs ........B-4 Table B-4 Lid board (FDIALS*/FDI3LS*) connectors ............B-5 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 256
Appendix B Board Layout Appendices B-ii [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 257
Figure B-1 System board (FDIASY*/FDI3SY*) layout (Front) Table B-1 System board (FDIASY*/FDI3SY*) connectors and ICs (Front) Name CN4800 USB Type-C connector CN4821 USB Type-C connector IS2641 nano SIM card I/F connector IS2220 Micro SD card I/F connector PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 269
Pin No. Signal name ZUSBCF-E3N DMICIN-P1P ZUSBCF-E3P XDMCLK-E1P CAMDET-P3N CN3380 FAN (1) I/F connector (4-pin) Table C-4 FAN (1) I/F connector (4-pin) Pin No. Signal name Pin No. Signal name FANG0-P3P IC3380-4 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Pin No. Signal name PNLOFF-S3N CN4850 USB Type-A connector (9-pin) Table C-8 USB Type-A connector (9-pin) Pin No. Signal name Pin No. Signal name USBPS0-E5V ZU3D1T-E1N ZUSBE3-E3N ZU3D1T-E1P ZUSBE3-E3P ZU3D1R-E1N ZU3D1R-E1P PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Signal name ISHIN0-E3N ISHCL0-E3P ISHDA0-E3P C.23 CN9860 System board I/F connector (5-pin) Table C-23 System board I/F connector (5-pin) Pin No. Signal name Pin No. Signal name ISHCL0-E3P ISHDA0-E3P ISHIN0-E3N C-14 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Appendix C Pin Assignments Appendices Lid board (FDIALS*) C.24 CN3291 System board I/F connector (3-pin) Table C-24 System board I/F connector (3-pin) Pin No. Signal name Pin No. Signal name PNLOFF-S3N C-15 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Pin No. Signal name Pin No. Signal name ISHIN0-E3N ZEDPAU-P1N ZEDPAU-P1P ISHDA0-E3P ZEDPA0-P1P ISHCL0-E3P ZEDPA0-P1N PVT-EFV PVT-EFV ZEDPA1-P1P PVT-EFV ZEDPA1-P1N PVT-EFV BKLPWM-E3P TPNLDT-P3N BLEN-E3P TPINT-P3N I2CDT1-P3P EDPHPD-P3P I2CCK1-P3P IC5390-4 PNL-P3V PNL-P3V C-17 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 284
Signal name ZUSBWC-E3N DMICIN-P1P ZUSBWC-E3P XDMCLK-E1P CAMDET-P3N C.28 CN3380 FAN (1) I/F connector (4-pin) Table C-28 FAN (1) I/F connector (4-pin) Pin No. Signal name Pin No. Signal name FANG0-P3P IC3380-4 C-18 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 285
C.29 CN2600 M.2 LTE I/F connector (75-pin) Table C-29 M.2 LTE I/Fconnector (75-pin) (1/2) Pin No. Signal name Pin No. Signal name 3GON-E1P ZUSB3G-E3P 3GRFON-E3P ZUSB3G-E3N 3GSAR-E1N ZU33GR-E1N UIMRS3G-E3P ZU33GR-E1P UIMCL3G-E3P UIMIO3G-E3P ZU33GT-E1N UIMPW3G-E3V ZU33GT-E1P C-19 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 286
Appendix C Pin Assignments Appendices Table C-5 M.2 LTE I/Fconnector (75-pin) (2/2) Pin No. Signal name Pin No. Signal name UIMDT3G-E3N 3GDET-E3N C-20 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 287
Signal name Pin No. Signal name 5G-E3V 5G-E3V 5GON-E1P ZUSB5G-E3P 5GRFON-E3P ZUSB5G-E3N 5GWAKE-E3N 5G-E3V 5GSAR-E1N IC2612-2 UIMRS5G-E3P UIMCL5G-E3P UIMIO5G-E3P UIMPW5G-E3V 5G-E3V ZER5G0-E1N ZER5G0-E1P ZET5G0-E1N ZET5G0-E1P IC2613-4 5GXRQ-P3N XPE5G-E0N PEWAKE-E3N XPE5G-E0P C-21 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 288
Signal name PNLOFF-S3N C.32 CN4850 USB Type-A connector (9-pin) Table C-32 USB Type-A connector (9-pin) Pin No. Signal name Pin No. Signal name USBPS0-E5V ZU3D1T-E1N ZUSBE3-E3N ZU3D1T-E1P ZUSBE3-E3P ZU3D1R-E1N ZU3D1R-E1P C-22 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Signal name ISHIN0-E3N ISHCL0-E3P ISHDA0-E3P C.47 CN9860 System board I/F connector (5-pin) Table C-47 System board I/F connector (5-pin) Pin No. Signal name Pin No. Signal name ISHCL0-E3P ISHDA0-E3P ISHIN0-E3N C-29 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Appendix C Pin Assignments Appendices Lid board (FDI3LS*) C.48 CN3291 System board I/F connector (3-pin) Table C-48 System board I/F connector (3-pin) Pin No. Signal name Pin No. Signal name IC3290-2 C-30 [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 297
Keyboard for UK ...................... D-1 Keyboard for US ....................... D-2 Keyboard for JP ......................D-3 Figure D-1 UK Keyboard ....................D-1 Figure D-2 US Keyboard ..................... D-2 Figure D-3 JP Keyboard ...................... D-3 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 298
Appendices Appendix D Keyboard Matrix D-ii [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 299
Appendix D Keyboard Matrix Appendices Keyboard for UK Figure D-1 UK Keyboard PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 300
Appendices Appendix D Keyboard Matrix Keyboard for US Figure D-2 US Keyboard [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 301
Appendix D Keyboard Matrix Appendices Keyboard for JP Figure D-3 JP Keyboard dynabook (960-931) [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual...
Page 302
Appendices Appendix D Keyboard Matrix [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 303
Keyboard for UK ....................... E-1 Keyboard for US ......................E-1 Keyboard for JP ......................E-2 Figure E-1 UK Keyboard ...................... E-1 Figure E-2 US Keyboard ...................... E-1 Figure E-3 JP Keyboard ......................E-2 PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 304
Appendices Appendix E Key Layout E-ii [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 305
Appendix E Key Layout Appendices Keyboard for UK Figure E-1 UK Keyboard Keyboard for US Figure E-2 US Keyboard PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 306
Appendices Appendix E Key Layout Keyboard for JP Figure E-3 JP Keyboard [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 307
Appendix F Wiring diagrams Appendices Appendix F Wiring diagrams (Not used) RGB Monitor Loopback Connector Figure F-1 RGB Monitor Loopback Connector LAN Loopback Connector Figure F-2 LAN Loopback Connector PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 308
Appendices Appendix F Wiring diagrams [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 309
3. If you fail to rewrite BIOS, then when you next turn on the power, the power icon may flash in orange or an error message may be displayed. In this case, repeat the rewriting procedure. PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 310
Appendices Appendix G BIOS rewrite procedures [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 311
This Appendix explains how to rewrite the EC/KBC system. The EC/KBC solely can’t be updated. It is updated at the BIOS update simultaneously. As for the BIOS update, refer to Appendix G. PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 312
Appendices Appendix H EC/KBC rewrite procedures [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Page 313
< non 5G/LTE model > Time (hours) 5,152.95 h < 5G model > Time (hours) 5,116.07 h < LTE model > Time (hours) 5,119.07 h ■ PDA3* Time (hours) 5,222.88 h PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL]...
Page 314
Appendices Appendix I Reliability [CONFIDENTIAL] PORTÉGÉ X30W-J/X30W-K, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Need help?
Do you have a question about the V Series and is the answer not in the manual?
Questions and answers