Table of Contents
Advertisement
6
DHW tank installation
z Place cover strip (Fig. 12, Item 4) on the sealing strip
of the thermal insulating jacket.
z Position rectangular thermal insulating plug (Fig. 12,
Item 3) in the cutout from the inside.
z Position round thermal insulating plugs in the holes
for the connections that are not required in the
thermal insulating jacket.
z Place thermal insulating disk (Fig. 12, Item 1) on the
top access port so it contacts the edge of the thermal
insulating jacket.
z Place tank cover (plastic cover, Fig. 12, Item 2) over
the thermal insulating disk and the edge of the
thermal insulating jacket.
z Remove the nameplate from the envelope with the
technical documentation.
z Pull protective foil off the back of the nameplate and
stick the nameplate under the existing smaller
nameplate (Fig. 13).
12
Installation and maintenance instructions Logalux ST400/3, 500/3, 750/3 and 1000/3 "US" • Issue 07/2005
2
1
Fig. 12 Thermal insulation – top access port
Item 1: Thermal insulation disk
Item 2: Tank cover
Item 3: Thermal insulating plug
Item 4: Cover strip
Fig. 13 Attaching nameplate
We reserve the right to make any changes due to technical modifications.
3
4
Advertisement
Table of Contents
