Section 2 Dnp3 Data Mappings; Overview; Supported Functions - ABB Relion REU 615 Manual

1MRS757056 C
Section 2
2.1
2.2
REU615
Point List Manual
DNP3 data mappings

Overview

This document describes the DNP3 data points and structures available in the IED.
The data points are unmapped as a default on the DNP3 level. The point lists
describe a superset of all DNP3 data available through the standard configuration/s
including the optional functionalities.
The point tables show all the available DNP3 data points in the IEDs. The data
objects in the point tables are listed based on the AFL and data object IEC 61850
names.
As a default, the class assignments are Class 0 and Class 1 for binary inputs and
Class 0 and Class 2 for analog inputs. These assignments can be modified later.
Analog values are provided with default scalings. The scalings can be freely
modified by the user.
This list represents the superset of DNP3 points. The actual set of available points,
meaning the actual set of available applications, is determined by the IED's order
code.

Supported functions

Table 2: Supported functions in REU615
Function block
PHLPTOC1
PHHPTOC1
PHIPTOC1
ROVPTOV1
ROVPTOV2
ROVPTOV3
PHPTUV1
PHPTUV2
PHPTUV3
PHPTOV1
PHPTOV2
PHPTOV3
PSPTUV1
Table continues on next page
Section 2
DNP3 data mappings
UE01 UE02
●
●
●
●
●
●
● ●
● ●
● ●
● ●
● ●
● ●
●
13