Electrolux KOEBP01X User Manual page 22

22 www.electrolux.com
3. Press
display shows: Function Lock.
4. Press
If the Pyrolysis function
works, the door is locked
and the symbol of a key
comes on in the display.
To turn off the function, press
display shows a message. Press
again and then
When you turn off the oven,
the function also turns off.
10.4 Set + Go
The function lets you set a heating
function (or a programme) and use it
later with one press of any symbol.
1. Turn on the oven.
2. Set a heating function.
3. Press
display shows: Duration.
4. Set the time.
5. Press
display shows: Set + Go.
6. Press
Press any symbol (except for
the function: Set + Go. The set heating
function starts.
When the heating function ends, a signal
sounds.
• Function Lock is on when
• The menu: Basic Settings
10.5 Automatic switch-off
For safety reasons the oven turns off
after some time, if a heating function
works and you do not change any
settings.
again and again until the
to confirm.
to confirm.
again and again until the
again and again until the
to confirm.
the heating function
works.
lets you turn the function:
Set + Go on and off.
30 - 115
120 - 195
200 - 245
250 - maximum
. The
The Automatic switch-off does not work
with the functions: Light, Food Sensor,
Duration, End Time.
10.6 Brightness of the display
There are two modes of display
brightness:
Day bright‐
ness
It is on when the
oven is turned on.
It is on for 10 sec
when you touch
any sensor field
during the night
brightness mode.
It is on when the
) to start
oven is turned off
and you set the
function: Minute
Minder. When the
function ends, the
display goes back
to the night bright‐
ness.
10.7 Cooling fan
When the oven operates, the cooling fan
turns on automatically to keep the
surfaces of the oven cool. If you turn off
the oven, the cooling fan can continue to
operate until the oven cools down.
(°C)
12.5
8.5
5.5
3
Night bright‐
ness
When the oven is
turned off, the dis‐
play is in night
brightness mode
between 10 PM
and 6 AM.
(h)