Front Cover - Husqvarna VIKING 350 Service Manual

Front cover

1. Dismount rear cover .
2. Loosen the button for the off-switch, winding, by pulling it straight out.
3. Loosen the two screws (B) from behind and screw (C) in the front corner of
the base plate.
4. Snap off cover (D) by bending its lower edge by means of a screwdriver.
5. Carefully bend away the front cover from the hand wheel and pull it straight
out.
6. Loosen the band cable of the foil keyboard from the circuit board by pulling
the outer covering of the white switch outwards.
38
104 72 57-26