Brinkmann 9400 Owner's Manual page 29

Side
Burner
Valve
Valve
Nozzle
Figure 1
Burner Venturi
Figure 2
Side Burner
Grate
Side Burner
Control Knob
Bezel
Step 18
Insert the two screws that are
already attached on the side burner
valve through the corresponding
key holes on the side burner front
panel and bezel, from the back of
the side burner front panel.
Depending on the side burner
valve, you will be using either the
outside key holes (Figure 1), or the
inside key holes (Figure 2). Pull the
valve downward or upward to lock
into place. Then tighten the two
screws.
WARNING: Never use your grill
without leak testing all
gas connections and
hoses. See the section
on "Leak Testing" in
this manual for proper
procedures.
Step 19
Place the side burner grate on the
side burner. Install the side burner
control knob onto valve stem.
28