Brinkmann 9400 Owner's Manual page 24

Choose a good, cleared assembly
area and get a friend to help you put
your grill together. Lay cardboard
down to protect grill finish and
assembly area.
CAUTION! Some parts may
contain sharp edges.
Wear protective gloves
if necessary.
Step 1
Attach cart base to side panels. Insert
four M6 X 12 mm bolts and M6 star
washers through cart base and into
legs and tighten securely. Be sure the
door hinges face forward.
Step 2
Attach back panel to legs using
four M6 X 12 mm bolts and M6 star
washers.
Step 3
Use two M6 X 12 mm bolts to attach
tank block bar to bottom shelf and
back cart panel
Note:
With the help of a friend, turn
the cart assembly over. Try to
minimize the stress to the legs.
Step 4
Attach leg caps to the left cart legs.
23
Door Hinge Pin Holes