Brinkmann 9400 Owner's Manual page 25

Hubcap
Wheel Axle
Bolt
Wheel
Leg
Washer
Step 5
Install the wheels as illustrated, by
inserting the wheel axle bolts
through the wheels, washers and
right side panel axle holes. Tighten
axle bolts securely using hex nut
wrench provided in parts pack.
Step 6
Snap wheel hubcaps onto the
outside of wheels as illustrated.
Note:
With the help of a friend, turn
the cart to its upright position.
Try to minimize the stress to
the legs.
Step 7
Attach the door bracket to the front
legs of the cart frame assembly
using four M6 X 12 mm bolts and
M6 star washers.
Step 8
To attach the door handle to the
door, insert two M6 x 12 mm bolts
halfway onto the door handle. Align
the bolts to the keyholes which are
located on the door panel, and
slide down. Then tighten the two
bolts securely. Repeat for other
door.
24