Brinkmann 9400 Owner's Manual page 27

Step 11
Insert the two bolts with pre-
attached nuts on the left side table
into the key holes on the side table
front panel. Tighten the nuts with
wrench.
Step 12
Attach hooks to side table towel
rack bar. Then attach towel rack bar
to side table using two M6 X 12 mm
hexagonal bolts and spring
washers.
Step 13
Insert the two bolts with pre-
attached nuts on the right side
burner assembly into the key holes
on the side burner assembly table
front panel. Tighten the nuts with
wrench.
Step 14
Attach hooks to side table towel
rack bar. Then attach towel rack bar
to side table using two M6 X 12 mm
hexagonal bolts and spring
washers.
26