Warning List - Epson Stylus PHOTO RX640 Service Manual

EPSON Stylus PHOTO RX640/650

3.2.2 Warning List

Causes
In adjustment of borderless This message is always displayed during
expansion value adjustment of the Borderless Expansion Value.
Position of CD/DVD guide
Printer did not recognize the CD/DVD tray
correctly when it was about to start printing.
(Re-set)
Set the CD/DVD guide CD/DVD tray was not in its position when the
(Set correctly) printer was about to stat printing,
Message related to ink (5) A non-genuine ink cartridge has been installed.
BT File size error
BT Designation error
BT structure error
While XHTML-Print data could be decoded, a part
or all of the reference object had a MIME encode
error and could not be obtained.
The following two problems are considered
depending on the type of the un-obtained reference
A part of the reference object
object.
is broken (BT-MIME).
For an image, an area where that image is to be
printed becomes blank.
For a CSS (style sheet) file, the background color,
basic character size or the like cannot be specified
as intended at the send side.
Troubleshooting
Table 3-2. Warning List
Details
You can change the amount of image enlargement.
If you reduce it too much, you may see a white border around your photo.
The front tray is in the wrong position.
Push down the tray lever to set the front tray to the CD/DVD position.
The CD/DVD tray is set incorrectly.
Set the CD/DVD tray correctly, then press the Start button.
The installed ink cartridges listed below differ from the genuine Epson
ink cartridges for this printer.
[Y] [BK] [LC] [LM] [M] [C]
The use of other products may affect your print quality and could result in
printer damage.
Do you want to continue using the currently installed ink cartridges?
[Yes] [No]
The document is too large to print with Bluetooth.
The document is too complex to print with Bluetooth.
Error in the data.
The document cannot be printed.
Error in the data.
The document may not be printed correctly.
Troubleshooting When There is Error Display
Displayed Message (TBD)
Guide Display "<OK>: Finish"
Guide Display "<Start Button>: Start"
Guide Display "<- ->:Make a Selection <OK>: OK"
Revision A
Recovery Procedure
Press the OK button.
Pull down the lever to change the
print position to the lower position.
Set the CD/DVD tray correctly, and
press the Start button.
Press the OK button
Press the OK button or wait for a
certain time (approx. 5 seconds).
Press the OK button or wait for a
certain time (approx. 5 seconds).
Press the OK button or wait for a
certain time (approx. 5 seconds).
Press the OK button or wait for a
certain time (approx. 5 seconds).
23