Texas Instruments TI-34 MultiView Quick Start Manual

Clear previous data:
Press
You will see CLEAR CNVRSN and a list underneath. Press the number
Entering Data (single list of data point
with each with frequency 1)
Press .
You should see L1, L2, and L3 lists
Input the first data number under L1.
Press .
Input the second data number.
Press .
Continue until you have entered all the
data.
Calculating mean and standard
deviation
Press
key).
You will see 1: 1-Var Stats. Press the
number key.
You will see
1-Var Stats
Data: L1 L2 L3
Frq: ONE L1 L2 L3
You want there to be a black background
and white letters on L1 in the data list and
ONE in the frq list. If you have to change
these, you press
data and . Then press
TI-34 MultiView
.
Entering Data (from a frequency
distribution)
Press
You should see L1, L2, and L3 lists
Input the first data number under L1.
Press
Input the second data number.
Press
Continue until you have entered all the
data.
Now press
Input the first frequency number under L2.
(above the
Press
Input the second frequency number.
Press
Continue until you have entered all the
frequency
.
Calculating mean and standard
deviation
Press
to switch to the
You will see 1: 1-Var Stats. Press the
.
.
.
to move to L2.
.
.
(above the
key).
key.