Download Print this page

Advertisement

Quick Links

The TMP116METER-EVM provides the user with an easy-to-read LCD screen while using the TMP116 for
measurement of ambient air temperature. The EVM measures 1.83 in × 1.45 in, so the system is fitted to
a small form factor for further convenience in space-constrained environments. The onboard
microcontroller (MCU) communicates with the temperature sensor using I2C communication protocol and
displays the measurement onto an LCD through SPI protocol.
...................................................................................................................
1
Introduction
2
Setup and Test Results
3
Schematic and Bill of Materials
1
TMP116METER-EVM Front View
2
TMP116METER-EVM Back View
3
Software Flow Chart
4
System Current Consumption
5
TMP116METER-EVM Schematic
Trademarks
All trademarks are the property of their respective owners.
1
Introduction
The TMP116METER-EVM comes pre-loaded with firmware that ensures successful operation upon
connection of the coin cell battery. Because the MCU is flashed using JTAG protocol, the test, reset, and
ground pins are broken out to a three-pin header for the user to have the option to flash the
MSP430FR5969 MCU. The device features three push-buttons: Button S1 functions to perform RESET,
S2 switches the temperature display format on the display (Celsius or Fahrenheit), and another button
(S3) can be programmed by the user. Test points are provided for the user to probe the clock and data
signal lines corresponding to I2C data transfer in addition to power and ground probe locations.
SNOU160 – April 2018
Submit Documentation Feedback
TMP116METER-EVM User's Guide
Contents
.....................................................................................................
............................................................................................
List of Figures
........................................................................................
.........................................................................................
........................................................................................................
..............................................................................................
.........................................................................................
Copyright © 2018, Texas Instruments Incorporated
User's Guide
SNOU160 – April 2018
TMP116METER-EVM User's Guide
1
4
6
2
2
5
6
7
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the TMP116METER-EVM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Texas Instruments TMP116METER-EVM

  • Page 1 SNOU160 – April 2018 TMP116METER-EVM User's Guide The TMP116METER-EVM provides the user with an easy-to-read LCD screen while using the TMP116 for measurement of ambient air temperature. The EVM measures 1.83 in × 1.45 in, so the system is fitted to a small form factor for further convenience in space-constrained environments.
  • Page 2 Introduction www.ti.com Figure 1. TMP116METER-EVM Front View Figure 2. TMP116METER-EVM Back View Features Low-power, high-accuracy temperature sensor: The TMP116 offers 16-bit resolution with an accuracy of ±0.2ºC (from -10ºC to +85ºC). Ultra-low-power MCU: The MSP430FR5969 can operate from 1.8V to 3.6V while consuming 0.4 µA in standby and 0.02 µA in shutdown.
  • Page 3 Therefore, Q1 does not turn on and current is not passed to the load through conduction of the body diode. SNOU160 – April 2018 TMP116METER-EVM User's Guide Submit Documentation Feedback Copyright © 2018, Texas Instruments Incorporated...
  • Page 4 This TMP116METER-EVM ships pre-loaded with software for its MSP430FR5969 MCU. When the battery is loaded, the display shows a Texas Instruments splash screen and then proceeds to display the current temperature and humidity. The rest of this section details the operation of the software.
  • Page 5 The below image yields the current consumption of the system while it is in its active mode. SNOU160 – April 2018 TMP116METER-EVM User's Guide Submit Documentation Feedback Copyright © 2018, Texas Instruments Incorporated...
  • Page 6 130 µA. The below equation yields an estimate for the expected battery life of the CR2032: Schematic and Bill of Materials To download the full design package, see the TI Design Guide. TMP116METER-EVM User's Guide SNOU160 – April 2018 Submit Documentation Feedback Copyright © 2018, Texas Instruments Incorporated...
  • Page 7 Schematic and Bill of Materials www.ti.com Schematic Figure 5. TMP116METER-EVM Schematic SNOU160 – April 2018 TMP116METER-EVM User's Guide Submit Documentation Feedback Copyright © 2018, Texas Instruments Incorporated...
  • Page 8 Header, 2.54 mm, 4x1, Gold, TH Header, 2.54 mm, 4x1, PBC04SAAN Sullins Connector Solutions R4, R5 2.00Meg RES, 2.00 M, 1%, 0.063 W, 0402 0402 CRCW04022M00FKED Vishay-Dale TMP116METER-EVM User's Guide SNOU160 – April 2018 Submit Documentation Feedback Copyright © 2018, Texas Instruments Incorporated...
  • Page 9 SNOU160 – April 2018 TMP116METER-EVM User's Guide Submit Documentation Feedback...
  • Page 10 IMPORTANT NOTICE FOR TI DESIGN INFORMATION AND RESOURCES Texas Instruments Incorporated (‘TI”) technical, application or other design advice, services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, “TI Resources”) are intended to assist designers who are developing applications that incorporate TI products;...
  • Page 11 STANDARD TERMS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms set forth herein.
  • Page 12 FCC Interference Statement for Class B EVM devices NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 13 【無線電波を送信する製品の開発キットをお使いになる際の注意事項】 開発キットの中には技術基準適合証明を受けて いないものがあります。 技術適合証明を受けていないもののご使用に際しては、電波法遵守のため、以下のいずれかの 措置を取っていただく必要がありますのでご注意ください。 1. 電波法施行規則第6条第1項第1号に基づく平成18年3月28日総務省告示第173号で定められた電波暗室等の試験設備でご使用 いただく。 2. 実験局の免許を取得後ご使用いただく。 3. 技術基準適合証明を取得後ご使用いただく。 なお、本製品は、上記の「ご使用にあたっての注意」を譲渡先、移転先に通知しない限り、譲渡、移転できないものとします。 上記を遵守頂けない場合は、電波法の罰則が適用される可能性があることをご留意ください。 日本テキサス・イ ンスツルメンツ株式会社 東京都新宿区西新宿6丁目24番1号 西新宿三井ビル 3.3.3 Notice for EVMs for Power Line Communication: Please see http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 電力線搬送波通信についての開発キットをお使いになる際の注意事項については、次のところをご覧ください。http:/ /www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 3.4 European Union 3.4.1 For EVMs subject to EU Directive 2014/30/EU (Electromagnetic Compatibility Directive): This is a class A product intended for use in environments other than domestic environments that are connected to a low-voltage power-supply network that supplies buildings used for domestic purposes.
  • Page 14 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2018, Texas Instruments Incorporated...
  • Page 15 IMPORTANT NOTICE FOR TI DESIGN INFORMATION AND RESOURCES Texas Instruments Incorporated (‘TI”) technical, application or other design advice, services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, “TI Resources”) are intended to assist designers who are developing applications that incorporate TI products;...