How To Start - Vaporesso GEN X User Manual

Resistance Range: 0.03-5Ω
Charging Current: 5V/2.5A

HOW TO START

Step 1: Fill the e-liquid and install the tank.
Twist the top cap and fill the e-juice through
the slot.
Install the tank onto the mod by screwing the
510 thread connector.
1
2
Step 2: Power on the device.
1) Press the power button 5 times in 2
seconds to power on or power off the
device.
2) Press the power button 3 times
continuously to lock or unlock the +, - and
mode buttons.
3) After installing the tank, the device will
automatically identify the coil material and
resistance, press + button for reset or –
button to maintain existing setting.
Step 3: Choose the mode.
1)PUL: PULSE mode (default). Boost flavor
with large cloud.
2 English