Black & Decker GK1930T Manual page 11

Saw chain and guide bar (fig. G)
After every few hours of use, remove the guide bar (6)
and the saw chain (5) and clean them thoroughly.
Make sure that the guard is clean and free from debris.
On reassembling, the guide bar (6) should be turned
through 1800 and the sprocket nose greased via the
sprocket lubrication hole (16). This ensures an even
distribution of wear around the guide bar rails.
Saw chain sharpening
If you are to get the best possible performance from the tool
it is important to keep the teeth of the saw chain sharp.
Guidance for this procedure is found on the sharpener
package. For this purpose we recommend the purchase of
the Black & Decker saw chain sharpening kit (available from
Black & Decker service agents and selected dealers).
Replacing worn out saw chains
Replacement saw chains are available through retailers or
Black & Decker service agents. Always use genuine spare
parts.
Saw chain sharpness
The saw chain cutters will blunt immediately if they touch the
ground or a nail whilst cutting.
Saw chain tension
Regularly check the saw chain tension.
What to do if your chainsaw needs repair.
Your chainsaw is in accordance with the relevant safety
requirements. Repairs should only be carried out by a
qualified person using original spare parts otherwise this
may result in considerable danger to the user. We
recommend you keep this user manual in a safe place.
Protecting the environment
Should you find one day that your tool needs
replacement, or if it is of no further use to you,
think of the protection of the environment. Black
& Decker repair agents will accept old Black &
Decker tools and ensure that they are disposed
of in an environmentally safe way.
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have
reached the end of their working life. To take advantage of
this service please return your product to any authorised
repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of
our after-sales service and contacts are available on the
Internet at: www.2helpU.com.
Technical data
GK1930T GK1935TGK1940T GK2040T
Voltage (Vac) 230
Power input (W) 1850
No load speed 5500
-1
(min )
Max cutting length 30
(cm)
Oil capacity (ml) 100
Weight (kg) 5.6
Safety class II
European Community design registration no.
000417274-0001
ENGLISH
230 230 230
1850 1850 2000
5500 5500 5300
35 40 40
100 100 100
5.7 5.85 5.9
II II II
11