Download Print this page

Black & Decker GK1935T Original Instructions Manual

Hide thumbs





  Also See for Black & Decker GK1935T

  Summary of Contents for Black & Decker GK1935T

  • Page 1 GK1935T GK2235T GK1940T GK2240T...
  • Page 5: Intended Use

    (Original instructions) ENGLISH Intended use 3. Personal safety a. Stay alert, watch what you are doing and use common Your Black & Decker chainsaw has been designed for pruning sense when operating a power tool. Do not use a power and felling trees and cutting logs.
  • Page 6 (Original instructions) ENGLISH f. Keep cutting tools sharp and clean. Properly Use extreme caution when cutting brush and maintained cutting tools with sharp cutting edges are less saplings. The slender material may catch the saw likely to bind and are easier to control. chain and be whipped toward you or pull you off g.
  • Page 7: Voltage Drops

    (Original instructions) ENGLISH Vibration Do not overreach and do not cut above shoulder height. This helps prevent unintended tip contact and The declared vibration emission values stated in the technical enables better control of the chainsaw in unexpected data and the declaration of conformity have been measured in situations.
  • Page 8: Additional Safety Instructions

    (Original instructions) ENGLISH Guard against electric shock Wear safety glasses or goggles when operating this Prevent body contact with earthed or grounded surfaces tool. (e.g. metal railings, lamp-posts etc.). Electric safety can be further improved by using a high-sensitivity (30 mA/ Always wear ear protection.
  • Page 9 (Original instructions) ENGLISH Oiling the chain Lightly pull on the chain (6) as shown (inset fig. I). The tension is correct when the chain (6) snaps back after You must do this whenever you use a new chain (6) for the being pulled 3 mm away from the guide bar (7).
  • Page 10 (Original instructions) ENGLISH How the anti-kickback chain brake works Pre-plan a safe exit from falling trees or branches. Make sure In the event of kickback, your left hand comes in contact with that the exit route is clear of obstacles that would prevent or the front guard, pushing it forwards, toward the workpiece, hinder movement.
  • Page 11: Troubleshooting

    (Original instructions) ENGLISH When supported at both ends: Problem Possible cause Possible First, cut one third down to avoid splintering and second, solution cut again to meet the first cut. Bar/chain appear Oil tank empty Check oil tank When supported at one end: hot/smoking level First cut one third up to avoid splintering and second, cut...
  • Page 12: Protecting The Environment

    Saw chain tension at: Regularly check the saw chain tension. Technical data What to do if your chainsaw needs repair. GK1935T GK2235T Your chainsaw is manufactured in accordance with the Typ. 2 Typ. 2 relevant safety requirements. Repairs should only be carried...
  • Page 13: Ec Declaration Of Conformity

    The product has been subjected to misuse or neglect; The product has sustained damage through foreign objects, substances or accidents; GK1935T, GK1940T, GK2235T, GK2240T Repairs have been attempted by persons other than authorised repair agents or Black & Decker service staff.
  • Page 15 ENGLISH Do not forget to register your product! Register your product online at or send your name, surname and product code to Black & Decker in your country.
  • Page 16 Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place Fax +64 9 259 1122 Mt Wellington Auckland 1060 United Kingdom Black &...

This manual is also suitable for: