Advertisement
Available languages
Available languages
ENGLISH
Even with the application of the
relevant safety regulations and the
implementation of safety devices, certain
residual risks can not be avoided. These
include:
Š Injuries caused by touching any
rotating/moving parts.
Š Injuries caused when changing any
parts, blades or accessories.
Š Injuries caused by prolonged use
of a tool. When using any tool for
prolonged periods ensure you take
regular breaks.
Š Impairment of hearing.
Š Health hazards caused by breathing
dust developed when using your
tool (example:- working with wood,
especially oak, beech and MDF.)
Chargers
Your charger has been designed for a
specific voltage. Always check that the
mains voltage corresponds to the voltage
on the rating plate.
Warning! Never attempt to replace the
charger unit with a regular mains plug.
Š Use your Black + Decker charger only
to charge the battery in the appliance
with which it was supplied. Other
batteries could burst, causing personal
injury and damage.
Š Never attempt to charge non-
rechargeable batteries.
Š If the supply cord is damaged, it must
be replaced by the manufacturer or
an authorised Black + Decker Service
Centre in order to avoid a hazard.
6
(Original instructions)
Š Do not expose the charger to water.
Š Do not open the charger.
Š Do not probe the charger.
Š The appliance/battery must be
placed in a well ventilated area when
charging.
Electrical safety
Symbols on the charger
Read all of this manual carefully before using the
appliance.
#
This tool is double insulated; therefore no earth wire
is required. Always check that the power supply
corresponds to the voltage on the rating plate.
$
The charging base is intended for indoor use only.
Labels on appliance
+
The following symbols appear on this appliance along with the
date code:
Read all of this manual carefully before using
the appliance
Only use with charger S010Q 14
S010Q 14
Features
This tool includes some or all of the following features.
1. On/off power switch
2. Handle
3. Nozzle
4. Pull out crevice tool
5. LED charging indicator
6. Dust bowl
7. Dust bowl release button
8. Charging base
9. Detachable push in brush accessory
10. Power head
Use
Switching on and off (Fig. A)
Š Press the button (1) to turn on, the unit operates
in slow speed, low power mode, conserving the
battery life.
Advertisement
