Menu Navigation - Culligan Aquasential Select Plus Iron-OX5 Owner's Manual

Menu Navigation

Advance timer
through display options
The programming menu for the Select Plus is outlined in the following table:
Setting
Time of Day
*Time of
Reconditioning
Reconditioning
There are several conditions that will cause the control to initiate a reconditioning cycle� The "REG" annunciator will light
when the control has signaled for a reconditioning� The "REG" annunciator will flash while the control is in reconditioning�
The following are conditions that will call for reconditioning:
1� When the flow meter has recorded the passage of a predetermined number of gallons�
2� At the preset time, when the number of days without a reconditioning is equal to the Timeclock Backup setting�
3� At the preset time, when the "REGEN" button is depressed once� "REG" will light�
4� Immediately, when the "REGEN" button is depressed for three seconds� "REG" will light and blink�
5� Immediately, if power to the unit has been off for more than 3 hours and time of day has been restored�
10
01040684 A 06/21
Initiate a regeneration
Table 1� Setting Time of Day
Display Range Limits
12:00 AM - 11:59 PM (12 hr)
00:00 - 23:59 (24 hr)
12:00 AM - 11:30 PM (12 hr)
00:00 - 23:30 (24 hr)
Increase
the setting
Decrease
the setting
Default
12:00 PM
12:00
2:00 AM
02:00