PLANET VIP-156/VIP-157 Quick Installation Guide
Device configurations on the ATA:
STEP 6:
Please log in ATA via web browser, browse to the SIP
setting menu and select the Domain Service config
menu. In the setting page, please browse to the
Auto-config page, and enable the Auto Configuration
features for IP PBX system.
STEP 7:
After enabling the auto-config feature, the ATA shall be
able to obtain IP address and SIP extension information
from IP PBX system IPX-2000 information. To verify the
auto-config results, you may connect telephone set to
ATA; press #120# to check if the IP address is obtained
from IPX-2000. And #122# can be used to verify the
extension number assigned by IPX-2000.
21