Viewing A Record - Noraxon Ultium Motion Quick Start Manual

Ultium Motion Quick Start Guide
Step 5
Ensure the subject is in the calibration position and
prepared to hold this position for 8 seconds during
the calibration procedure.
Click Calibrate to proceed and monitor the subject
to confirm the calibration position was held for the
entire calibration process.
Step 6
After performing the calibration, click Record to
begin recording data.
When you are ready to end the recording, click
Stop.
Save the recording to the database and type in a
desired name, then click Discard & Measure Again
or Save & Measure Again to return to the
measurement screen or click Save & View to
visualize the recording.

7 Viewing a Record

To view a previously recorded record, click the Database tab. Records are organized by Project and Subject name. Double-
click on the record of interest to open the record in the Viewer tab.
8 Further Use Features of MR3
There are many additional features built within MR3. Such as:
•
Multi-activity recordings
•
Live biofeedback visual displays
•
Online and post-measurement signal processing
•
Customized reporting
•
Exporting (and importing) of data
To learn more about the features available to you through the system(s) you have purchased, refer to the myoRESEARCH
User Manual and the corresponding Hardware User Manual for this device (P-8708).
(Rev A)
9