Recording A Measurement - Noraxon Ultium Motion Quick Start Manual

Ultium Motion Quick Start Guide

6 Recording a Measurement

Step 1
On the Home screen, click the myoMOTION
module icon.
Create a New Subject.
Note: Defining the subject's height is required to
compute bone lengths and create an accurate
skeletal avatar.
Select New Configuration.
Step 2
Insert the Ultium Motion device into the
configuration by dragging it from the list of
Available Devices to the Devices in Your
Configuration area.
Select the desired body segment sensors and
associated data to include in the measurement
configuration.
Step 3
Continue to the next step by clicking Start
Measure.
Activate the hardware by clicking Activate.
Note: If operating within a distorted magnetic
environment, open the Motion Calibration
dropdown menu on the right-side toolbar to select
a Functional Calibration, then click Activate.
Step 4
In the right-side toolbar, select the desired
calibration method.
Note: If desired, select a Correction Mode from the
right-side toolbar prior to calibrating.
Note: If using a Functional Calibration, follow the
instructions from the software wizard in the right-
side toolbar.
(Rev A)
8