Advertisement
The tile cutter is designed to standardly cut small and medium sized tiles (glazed tiles, ceramic tiles or
similar), which can be adjusted in their size via the machine. Never cut wood or metal.
Before use
The machine needs to be placed stably. The cutter should be installed to a fixed work bench
or the frame included in the delivery.
All covers and safety devices need to be installed correctly before operating the machine for
the first time.
The cutting wheel needs to spin evenly.
Make sure that the current on the type label of the machine matches with the supply voltage
before plugging the device in.
Assembly and operation
Assembly (Fig. 2–6)
1. Attach the legs (18) with 4 screws (19) to the frame (12). Then position the frame upright.
2. Place two screws (37) for the collecting basin through the square holes and place the collect-
ing basin (3) into the frame (12).
3. Attach the cooling water pump (13) to its fixture (38). Place the tile cutter in the recess and
screw the basin fixing (39) on.
4. Remove the star grip screw (11) and the spacer (40) and place them in a safe area.
5. Fill the basin with water until the cooling water pump is fully submersed. Be careful when filling
the basin with water. Make sure you do not touch any electrical equipment with it!
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 61285
Page 6
03
2021-1
Advertisement
