Advertisement
Introduction
Thank you for purchasing this quality product. To minimize the risk of injury we urge that our cli-
ents take some basic safety precautions when using this device. Please read the operation in -
structions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety notes
Caution:
This machine is not meant to be operated by people (including children) with limited physical, sensory
or mental abilities and/or lack of knowledge, except if they are supervised or have been instructed on
how to use this machine by a person who is responsible for their safety and well-being.
Children must be supervises to ensure that they do not play with the device.
Attention:
Visually examine the machine before every use. Do not use this machine if safety mechan-
isms are damaged or worn. Never override any safety mechanism.
The device should only be used for the purpose described in this operating manual.
You are responsible for the safety in the working area.
If the cable or the plug have been damaged due to external influences, the cable must under
no circumstances be repaired, but needs to be exchanged for a new one. The work can only
be carried out by a qualified technician.
The voltage of 230 V AC stated on the type plate of the machine needs to match the existing
supply voltage.
The machine must never be transported, attached or picked up by its cable.
Ensure that the electrical plug connection is located in a flood-secure area and protected from
humidity.
Before working on the machine, the plug needs to be disconnected from the socket.
The operator is responsible for the compliance with all local safety and installation regulations.
If necessary, contact a qualified technician.
If the machine needs to be repaired in any way, the maintenance work can only be carried out
by a qualified technician.
Warning:
Read all safety notes and instructions. Negligence of complying with the safety notes and instruc-
tions can lead to electric shock, fire and/or serious injury.
Keep all safety notes and instructions of this manual for future reference.
Examine the machine before using it for any damages, especially the cutting disc. Ensure that
all attachments are installed orderly. Before using the tool, all safety devices and other parts
need to be checked on their impeccable functioning. Damaged parts need to be exchanged
prior to use.
Make sure all moving parts are securely fastened and cannot block the cutting disc.
The device must not be used if the on/off switch does not function at all or not properly.
The blade protection must never be removed or blocked.
If the blade protection should be blocked, it needs to be replaced or repaired.
Never remove the splitting wedge.
The tile cutter is only designed for short-term operation. After 15 min, the machine needs to be
switched off for 15 min.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 61285
Page 3
03
2021-1
Advertisement
