Brush Heads - Braun Oral-B GENIUS X Manual

brushing your teeth with one of the Oral-B oscillating-rotating brush heads
guide the brush head slowly from tooth to tooth, spending a few seconds on
each tooth surface. With any brush head start brushing the outsides, then the
insides and finally the chewing surfaces. Brush all four quadrants of your
mouth equally (picture ➂). You may also consult your dentist or dental hygienist
about the right technique for you.
In the first days of using any electric toothbrush, your gums may bleed slightly.
In general, bleeding should stop after a few days. Should it persist after 2
weeks, please consult your dentist or dental hygienist. If you have sensitive
teeth and/or gums, Oral-B recommends using the «Sensitive» mode (optional
in combination with an Oral-B «Sensitive» brush head).
Smart Ring features
Your toothbrush is equipped with a Smart Ring (2) that has various
functionalities indicated via different colors of light:
White (default) = Operating and visual timer light (choose individual color
Red
Blue
Timer
The timer signals with a short stuttering sound and a flashing light of the Smart
Ring at 30-second intervals to move to the next quadrant of your mouth
(picture ➂). A long stuttering sound and a flashing light indicate the end of the
professionally recommended 2-minute brushing time.
The timer memorizes the elapsed brushing time, even when the handle is
briefly switched off during brushing. The timer resets if pausing longer than 30
seconds, briefly pressing the mode button (4) during pause or placing the
handle on the plugged-in charger.
Note: During the use of the Oral-B
some features.
Note: You can also customize the timer settings via Oral-B
Pressure sensor
If too much pressure is applied, the Smart Ring (2) will light up in red, reminding
you to reduce pressure. Constant high pressure for more than 5 seconds is
indicated with a fast flashing Smart Ring (2). In addition the pulsation of the
brush head will stop and the oscillation movement of the brush head will be
reduced (during «Daily Clean», «Pro Clean» and «Sensitive» mode) (picture ➂).
Periodically check the operation of the pressure sensor by pressing moderately
on the brush head during use.
Note: During the use of the Oral-B
deactivated for some features.
Brushing modes (depending on model)
Your toothbrush offers different brushing modes indicated on the brushing
mode display (6) on your handle («Daily Clean» mode does not illuminate on the
brushing mode display):
«Daily Clean»
«Pro Clean»
«Sensitive»
«3D White»
«Gum Care»
«Tongue Clean» – Tongue cleaning for occasional or everyday use
When operating the «Tongue Clean» mode, we recommend using the
«Sensitive» brush head. You can brush your tongue either with or without
toothpaste. Brush the whole area of your tongue systematically in gentle
movements. The recommended brushing time is 20 seconds; indicated with a
flashing light of the Smart Ring.
Your toothbrush automatically starts in the mode selected last. To switch to
other modes, successively press the mode button during use (picture ➃).
To return from any mode back to «Daily Clean» mode, press and hold the
mode button (4).
Note: You can also customize the mode settings via Oral-B

Brush heads

Oral-B offers you a variety of different Oral-B brush heads that fit your Oral-B
toothbrush handle.
Our oscillating-rotating brush heads can be used for tooth-by-tooth
precision cleaning.
Oral-B CrossAction brush head
7
91638765_D706_NA.indd 7 91638765_D706_NA.indd 7
™
via Oral-B App settings)
= Pressure sensor light
= Bluetooth ® pairing indicator
™
™
– Standard mode for daily cleaning
– For an extraordinary clean feeling
(operated with a higher frequency)
– Gentle, yet thorough cleaning for sensitive areas
– Polishing for occasional or everyday use
– Gentle massage of gums
Our most advanced brush head. Angled bristles for a precise
clean. Lifts and powers away plaque.
App, the timer may be deactivated for
App, the pressure sensor may be
™ App.
™ App.
16.06.20 11:51 16.06.20 11:51