Using Your Toothbrush - Braun Oral-B GENIUS X Manual

English
Important Information
• Your Oral-B toothbrush can be used with your smartphone (find details
under «Connecting your toothbrush to your Smartphone»).
• To avoid electromagnetic interference and/or compatibility conflicts,
deactivate Bluetooth
restricted surroundings, such as aircrafts or specially marked areas in
hospitals.
• Deactivate Bluetooth by simultaneously pressing the on/off (3) and mode
button (4) for 2 seconds until the Bluetooth indicator (7) goes off. Follow
the same procedure to reactivate Bluetooth again.
• Persons with pacemakers should always keep the toothbrush more than
six inches (15 centimeters) from the pacemaker while turned on. Anytime
you suspect interference is taking place deactivate Bluetooth.
Description
1 Brush head
2 Smart Ring
3 On/off button
4 Brushing mode button
5 Handle
6 Brushing mode display
7 Bluetooth
8 Charge level display
Accessories (depending on model):
9 Basic charger (with fixed cord)
10 Brush head holder
11 Brush head compartment with protective cover
12 Charging travel case
12a Charge indicator light
12b USB port
12c Smart plug port
12d Inner lid (with smartphone holder)
12e Removable inlay
13 Power Cord (power supply)
14 Charging stand (with detachable cable)
15 Beauty bag
16 Basic travel case
17 Charger pouch
Note: Content may vary based on the model purchased.
Specifications
For voltage specifications refer to the bottom of the charging unit.
Noise level: 68 dB(A)
Charging and Operating
Your toothbrush has a waterproof handle, is electrically safe and designed for
use in the bathroom.
• You may use your toothbrush right away or charge it briefly by placing it on
the plugged-in basic charger (9) or charging stand (14). When using the
charging stand (14) use the extra power cord (13) provided (picture B). The
power cord may be used for all global mains voltage ranges (100 -240V).
Note: In case the battery is empty (no lights illuminated on charge level
display (8) while charging or no reaction when pressing the on/off button (3)),
charge at least for 30 minutes.
• The charge level is indicated on the charge level display (8). Flashing lights
indicate that the battery is charging (picture ➀/B); once it is fully charged, the
lights turn off. A full charge typically takes 12 hours and enables at least 2
weeks of regular brushing (twice a day, 2 minutes).
Note: At a very low charge level, the lights might not flash immediately; it can
take up to 30 minutes.
• If the battery is running low, a red light is flashing on the charge level display
and the motor is reducing its speed. Once the battery is empty, the motor will
stop; it will need at least a 30-minute charge for one usage.
• You can always store the handle on the plugged-in charger to maintain it at
full power; a battery overcharge is prevented by device.
Note: Store handle at room temperature for optimal battery maintenance.
Caution: Do not expose handle to temperatures higher than 122°F / 50°C.

Using your toothbrush

Brushing technique
Wet brush head and apply any kind of toothpaste. To avoid splashing, guide
the brush head to your teeth before switching on the handle (picture ➁). When
6
91638765_D706_NA.indd 6 91638765_D706_NA.indd 6
®
on your toothbrush handle (5) before using it in
®
indicator
16.06.20 11:51 16.06.20 11:51