Before Use; Spare Parts - Baltic FORCE HAMMAR 190N User Manual

3

BEFORE USE

Hammar Automatic valve
1.
and rearmed. Carefully follow the instructions in the Hammar manual.
CHECK THE ACTIVATING CORD
2.
accessible without opening the lifejacket.
DEFLATION
4
The cap on the mouth inflation tube is turned upside down and gently pressed down into the tube
. Squeeze out the air. Replace the cap on the mouth inflation tube, in the normal position, before
6
repacking. NOTE! Do not use any other object than the upside down cap to deflate the lifejacket.
REARMING
BEFORE REARMING
Follow the instructions in the Hammar manual.
5-17
REPACKING
BEFORE REPACKING
Follow these instructions carefully.
•
Repacking must be carried out with dry hands, in dry surroundings and without tools.
•
Place the inflatable lifejacket, back downwards, on a flat surface
•
Make sure the lifejacket is deflated and the mouth inflation tube's cap is in the normal position
•
and the indicator shows green.

SPARE PARTS

Rearming kit Baltic 45 g CO
Whistle
Reflector kit
Crutch strap kit 30 mm
ACCESSORIES
There are a number of accessories for inflatable lifejackets, which can be used in different situations.
These accessories are available through Baltic retailers.
BALTIC LIFEJACKETS - USER´S GUIDE
4 : If the indicator is red, the lifejacket must be inspected
5 Check that the activating cord runs freely and is
.
cylinder, Part No 2456. Includes 45 g CO
2
9
.
7
cylinder.
2