Advanced Options - C-LOGIC 900-TC Instruction Manual

Advanced options

Under turn off state, press the key
the keys and and press the key
parameters are set, wait 5 seconds and the thermostat exit from the advanced setting menu.
Symbol Description
Measured
A1 temperature
adjustment
Temperature
A2
hysteresis
A3 Not apply
Options of
A4
sensor control
A5 Lock function
High measured
A6 temperature
value
Low measured
A7 temperature
value
Low setting
A8 temperature
value
High setting
A9 temperature
value
Descaling
AA
function
AB Not apply
Weekly
AC programming
selection
Restore to
AA Factory default
setting
Note: If when the thermostat is turn on, the symbols "E1" or "E2" are displayed, it is because a inco-
rrect setting of the parameter A4. Please, enter into the advanced option menu and select N1 for that
parameter.
to access advanced setting. Modify the parameter by using
to confi rm and jump to the next parameter. When the
Parameter setting
-9-+9 ºC
0.5-2.5 ºC
Not apply
N1: Built-in sensor
N2 and N3: external sensor (Not apply to this
0: Half lock
1: Full lock
1. 35 ºC-70 ºC
2. Under 35ºC, screen displays
temperature limit is cancelled.
1. 1 ºC-10 ºC
2. Exceed 10ºC, screen displays
perature limit is cancelled.
1-10 ºC
20-70 ºC
0: descaling function disabled;
1: descaling function enabled;
Descaling function: when valve is continuously
closed over 100 hours, it will be opened for 3
minutes automatically.
Not apply
Hold down the key
displayed.
14
model)
and high
and low tem-
0: 5+2
1: 6+1
2: 7
when this parameter is
Default
value
0.0 ºC
1 ºC
N1
0
45 ºC
5 ºC
5 ºC
35 ºC
0
0