C-LOGIC 900-TC Instruction Manual page 16

Step 4: Connect to the Wi-Fi signal
To add a new thermostat, press the "+" icon on the upper right side of the screen and select the option
"thermostat".
Then, the procedure for connecting the device via Wi-Fi is initiated. Press "Confi rm indicator rapidly
blink" and enter the password of your wifi router.
Before pressing "Confi rm" and under the power on state of the thermostat, press the keys
at the same time until the
After a few seconds, the thermostat will be added.
and icons blink. Then confi rm the password in the app.
16
Step 3: Add a home
To defi ne the location where the
thermostat is installed, press "Add home"
and a new screen will be displayed. In that
screen, you can enter a name, location or
the number of rooms of the home.
Then, you can observe the setting for that
home.
and