Time Setting; Automatic Programming - C-LOGIC 900-TC Instruction Manual

Mode Explanation
Under automatic mode and unlock state, when acting on the keys
adjust the setting temperature, the thermostat will enter into the temporary
Temporary
manual mode. This temporary mode works to next interval when it will return to
manual mode
the automatic mode. If you want to return to manual or automatic mode, please
press the key
Press the key
ON to enable the holiday mode and press the key
Holidays number of days (countdown until returning to automatic mode) and prees the key
mode
confi rm and exit to main screen. To cancell the holiday mode, return to the holiday
setting screen, select OFF and press the key

Time setting

Press the key to enter into the time setting menu.
Firstly, minutes are fl ashing. Adjust the minute value and press the key
fl ashing. Adjust the hour value and press the key
current weekday and press the key

Automatic programming

The programmable thermostat offers the possibility of set an automatic 6 period program. In the
advanced options, it is possible to select the kind of program in function of number of working days
and weekend between 3 possibilities: 5+2 (by default), 6+1, 7.
Press the key to enter into the automatic program-setting menu. Then adjust the initial time
and temperature for the fi rst period. Press the key
parameters are confi rmed, the next period is displayed until the whole program is set.
By default, the program is set as indicated below:
Period
5 working days + 2
weekend
once or twice respectively.
for 3 seconds in order to enable and set the holday mode. Select
to confi rm. Finally adjust the setting temperature and press the key
to confi rm and exit from the time setting menu.
Icon
1
2
3
4
5
6
to confi rm. Finally weekday is fl ashing. Select the
to confi rm every parameter. When those
Default initial time
06:00
08:00
11:30
13:30
17:00
22:00
13
to confi rm. Then adjust the
.
to confi rm. Then, hours are
Default temperature
20ºC
15ºC
15ºC
15ºC
15ºC
15ºC
and to
to