Honda FourTrax Recon TRX250TM 2019 Owner's Manual page 134

Brakes
5. Back the adjuster off three clicks, then squeeze the brake lever
several times. Spin the wheel manually to make sure the brake
does not drag.
6. Line up the inspection hole with the second adjuster and repeat
steps 3 through 5.
7. Reinstall the inspection hole plug, seating it into the inspection
hole as shown.
8. Follow steps 3 through 7 to adjust the other front brake.
9. Recheck the brake lever freeplay. If freeplay is still excessive after
adjusting the brake lining clearance, there is probably air in the
brake system and it must be bled out. See your dealer for this
service.
124 Servicing Your Honda