Gear Case Oil - Honda FourTrax Recon TRX250TM 2019 Owner's Manual

Gear Case Oil

Oil Recommendation
type
viscosity (weight)
suggested oil
Changing Oil
Refer to Safety Precautions on page 79.
Change the oil with the gear case at normal operating temperature
to assure complete and rapid draining.
1. Park the ATV on level ground.
2. Place an oil drain pan under the oil drain plug (1).
3. Remove the oil fill cap (2) and the drain plug and sealing washer
(3).
4. After the oil has completely drained, reinstall the drain plug with
a new sealing washer, and tighten it to the specified torque:
9 lbf·ft (12 N·m , 1.2 kgf·m)
5. Pour the drained oil into a suitable container and dispose of it in
an approved manner (page 158).
NOTICE
Improper disposal of drained fluids is harmful to the environment.
100 Servicing Your Honda
hypoid gear oil
SAE 80W-90
Honda shaft drive oil or equivalent