Exhaust Blower Hook-Up For Ls-1630S & Up - BOSSLASER LS Series Quick Start Manual

QUICK START GUIDE FOR LS MACHINES
Exhaust Blower Hook-Up for LS-1630s & Up
Exhaust Power Requirement
500 CFM Blower: 20 A / 1800 W (at start-up), 5.8 A / 667 W (at idle)
Three hose clamps (in toolbox)
Exhaust Port located at
the bottom (ex. LS-3655 shown)
6" Exhaust tubing installed
w/ hose clamp
Connect exhaust tubing from machine to
intake. Then connect exhaust tubing to
the exhaust port to your preference.
Document Number: 855-915 Revision: 001 Revision Date: 12/11/2019 BOSSLASER - PAGE 4 of 18