Water Pump Hook-Up - BOSSLASER LS Series Quick Start Manual

QUICK START GUIDE FOR LS MACHINES

Water Pump Hook-Up

Water pump w/ fitting & hosing
Installing silicone tubing
from water pump to
Water In machine
Fill up the 5 gallon bucket to where the water pump is completely submerge
in Distilled Water and cover it with a bucket lid (to keep any debris away)
Note: It is recommended to keep the water temperature between
Document Number: 855-915
Water pump in 5
18 - 25 degrees Celsius (64 - 77 degrees Fahrenheit)
Revision: 001
Installing
Suction cups
gallon bucket
Revision Date: 12/11/2019
Installing fitting for
silicone tubing
Using the 2nd silicone
tubing, connect it
from Water Out to 5
gallon bucket
BOSSLASER - PAGE 7 of 18