Table of Contents
Advertisement
QUICK START GUIDE FOR LS MACHINES
Toolbox Contents
1. Exhaust Hose Clamps (3 count)
2. 6mm Nylon High Pressure Hosing
3. Resistor w/ Voltage & GND Wiring Clamps
4. Air Nozzle Regulator
5. High Precision Proximity Switch
6. Water Chiller Bypass Signal
7. 250V/20A Fuses (2 count)
8. Universal Machine Door Keys (3 sets of 2's)
9. Processing Test File Sample
10. Phillips Head Screwdriver
NOTE: The circled contents are used for testing purposes (assisted w/ Technical Support, if needed).
For LS-1416/LS-1420 machines, a 4" flange is included in the toolbox.
Document Number: 855-915
Revision: 001
11. 500 MB Flashdrive
12. Ignition Keys (1 set of 2's)
13. A Set of Allen Keys
14. Focal Guide
15. 6-Pin Terminal w/ Wire Loop
16. Mirror Removal Tool
17. Lens Removal Tool
18. Power Cord
19. Nozzle Removal Tool
Revision Date: 12/11/2019
BOSSLASER - PAGE 9 of 18
Hide quick links:
Advertisement
Table of Contents
