Beko BEVPA 090 Owner's Manual page 26

6 Troubleshooting
Phenomenon
The wind blows out, but the
cooling/heating effect is not
good.
The indoor unit blows out
odor.
There is sound of running
water during the running of air
conditioner.
A slight "click" sound is heard
at the moment of start-up or
shut-down.
26 / 220 EN
• E xcessive accumulation of dust on filter, blocking at air inlet
and outlet, and the excessively small angle of the louver
blades all will affect the cooling and heating effect. →
Please clean the filter, remove the obstacles at the air inlet
and outlet and regulate the angle of the louver blades.
• P oor cooling and heating effect caused by doors and
windows opening, and unclosed exhaust fan. → Please
close the doors, windows, the exhaust fan, etc.
• A uxiliary heating function is not turned on while heating,
which may lead to poor heating effect. → Turn on the
auxiliary heating function. (only for models with auxiliary
heating function)
• M ode setting is incorrect, and the temperature and wind
speed settings are not appropriate. → Please re-select
the mode, and set the appropriate temperature and wind
speed.
• T he air conditioner itself does not have undesirable odor.
If there is odor, it may be due to accumulation of the odor
in the environment. → Clean the air filter or activate the
cleaning function.
• W hen the air conditioner is started up or stopped, or the
compressor is started up or stopped during the running,
sometimes the "hissing" sound of running water can be
heard. → This is the sound of the flow of the refrigerant,
not a malfunction.
• D ue to temperature changes, panel and other parts will
swell, causing the sound of friction. → This is normal, not a
fault.
Split type wall mounted air-conditioner / Owner's Manual
Troubleshooting