Table of Contents
Advertisement
Choose between ON and OFF by using up/down keys (Do not press ENTER yet).
At ON mode the system will record during the set time zone. At OFF mode
system will record except for the set time zone.
Move to time fields by using left/right keys and set up the time zone by using
up/down keys and press ENTER.
► RECORD MODE
Choose the REC MODE and press the ENTER button.
Choose among QUAD, MONITOR, CH1, CH2, CH3, and CH4 and press the
ENTER button. In the QUAD mode, recording will be done in quad view.
In the MONITOR mode, what is displayed on the monitor will be recorded.
(Exception : zoom, PIP, freeze)
When CH1, CH2, CH3, or CH4 is selected only the corresponding channel will
be recorded.
► REC1 SPEED
Choose the REC 1 SPEED and press the ENTER button.
Choose a speed between 1~30 frames/second for NTSC or 1~25
frames/seconds for PAL and press the ENTER button.
► REC1 QUALITY
Choose the REC 1 QUALITY and press the ENTER button.
Choose among VHS, SVHS and +SVHS and press the ENTER button.
► REC1 MOTION
Choose the REC1 MOTION and press the ENTER button.
Choose among OFF, LOW, MEDIUM and HIGH and press the ENTER button.
► Follow the same for REC2.
HOLIDAYS
1. OFF 00/00/00 – 00:00
2. OFF 00/00/00 – 00:00
3. OFF 00/00/00 – 00:00
4. OFF 00/00/00 – 00:00
SELECT TIME AND
PRESS ENTER TO SETTING
Fig. 8-26 (Holidays Display)
HOLIDAYS
-- 00/00/00 – 00:00
-- 00/00/00 – 00:00
-- 00/00/00 – 00:00
-- 00/00/00 – 00:00.
- 39 -
Recording start
Recording finish
↓
Next page
Advertisement
Table of Contents
