Table of Contents
Advertisement
When necessary, use ALM OUT. The output of ALARM OUT is a relay contactor
type and supports NO. or NC. The output capacity is 220V 1A and a higher
capacity can cause system failure.
Refer to Fig. 6-5 for the connection to ALARM OUT.
Connection to RS232C
Connect the cable to RS232C. Our RS232C connector is a DSUB9 type.
►
The maximum cable length is 50'. When you want to use a longer cable, use
the RS232 to RS485 converter.
Refer to Fig. 6-6 for connector pin configuration.
Connection to Ethernet
► Connect the cable to Ethernet. Our Ethernet connector is a RJ45 type. The
maximum cable length is 300'. When you want to use a longer cable, you must
use a repeater. Refer to Fig. 6-7 for connector pin configuration.
Fig. 6-5
Fig. 6-6
- 11 -
Advertisement
Table of Contents
