Table of Contents
Advertisement
Select a HDD and press the ENTER button. Press the ENTER button again for
formatting or press ESC button to go back to the previous mode.
The rate of formatting progress is shown at the bottom of the screen while
the HDD is being formatted.
Press the ESC button to return after formatting is completed.
FACTORY DEFAULT
TIME/DATE ☞
RS232C ☞
HARD DISK ☞
FACTORY DEFAULT
SYSTEM INFORMATION ☞
NETWORK IP CONFIG
PRESS ENTER TO SETTING
PRESS ESC TO RETURN
Fig. 8-16 FACTORY DEFAULT DISPLAY
► FACTORY DEFAULT
Choose FACTORY DEFAULT in the SYSTEM menu with the navigation keys and
press the ENTER button.
Press the ENTER button to setup the system default values and Press the ESC
button to return.
SYSTEM INFORMATION
Fig. 8-17 SYSTEM INFORMATION DISPLAY
► SYSTEM INFORMATION
SYSTEM
SYSTEM INFORMATION
VERSION. x. x. x
STAND ALONE 4CH DVR
COPYRIGHT 2004
PRESS ANY KEY TO RETURN
- 31 -
Advertisement
Table of Contents
