Table of Contents
Advertisement
Choose SYSTEM INFORMATION in the SYSTEM menu with the navigation keys
and press the ENTER button.
NETWORK IP CONFIGURATION
Fig. 8-18 Network IP Configuration Setup
Choose NETWORK IP CONFIG in the SYSTEM menu with the navigation keys
and press the ENTER button.
► IP MODE
Choose IP MODE in the NETWORK IP CONFIG menu and press the ENTER button.
Choose DYNAMIC-IP or STATIC-IP with the navigation keys and press the ENTER
button.
DYNAMIC-IP : The IP is automatically allocated via router or gateway.
Therefore the gateway address, subnet mask and IP address will be
automatically allocated.
STATIC-IP : This has to be set when the STATIC IP is used. The Gateway address,
subnet mask and the IP address have to be set.
► GATEWAY / SUBNET / IP ADDR
Choose the item and press the ENTER button.
Set the value using the navigation keys: UP/DOWN keys for changing
the value and LEFT/RIGHT keys for choosing the field.
► MAC ID
The MAC ID was consigned to each DVR unit at the factory
► PORT
The PORT is the TCP address of the program which is used to connect to the
network viewer and has a range of 1~65535.
Choose the item and press the ENTER button.
NETWORK IP CONFIG
IP MODE : STATIC-IP
GATEWAY : 66.18.153.XXX
SUBNET
: 255.255.255.XX
IP ADDR : 66.18.153.XXX
MAC ID : 0005D0FFXXXX
PORT
: 4001
- 32 -
Advertisement
Table of Contents
