Clover CDR-4170 Instruction Manual page 12

10. LED - REC
FUNCTION - PLAY
- TIMER
- ALARM
- HDD FULL : The LED is lit when the space of HDD is less than 1GB. If
- POWER
11. REC - Press this button to starts Continuous Recording.
- Press and hold this button for about 3 seconds to stop Recording.
12. USB PORT - Save playback data or connect an USB Memory for updating Firmware.
13. OSD / - Press this button to turn the OSD (On Screen Display) on. Press this
ALRST
- Press this button to reset the system when Alarm or Motion event occurs.
14. SETUP / - Press this button in the LIVE mode, the SETUP menu will be displayed.
PTZ - Press and hold this button for about 3 seconds, the PAN/TILT menu will
15. SEARCH / - Press this button in the LIVE mode, the SEARCH/HDD SET menu will
SYS-LOG
- Press and hold this button for about 3 seconds in the LIVE mode, the
- SYSTEM LOG Information.
- It will create upto 300 log lists.
16. BACKUP /
WTMK
- Format the USB with your computer and plug it on USB PORT (See #12).
- Press this button when the system is in the playback mode.
- It will start to copy recorded data from your DVR right after displaying
- Press this button again to stop copy.
- It will stop to copy after displaying " PLEASE WAIT..., COPY OK".
: The LED will blink when the system is in the recording mode.
: The LED will blink when the system is in the replaying mode.
: When the SCHEDULE RECORD is set, the LED will blink
before it starts RECORDING.
: The LED is lit when ALARM is set.
HDD OVERWRITE is set, the LED won't be lit even though
the space of HDD is less than 1GB.
: The LED is lit when the POWER switch is on.
button again to turn the OSD off (Except "PLAY" and "REC" sign).
be displayed. Press the STOP/ESC button to return to the QUAD mode.
display on the screen.
SYSTEM LOG menu will display on the screen.
R-S : It stands for Recording Start.
R-E : It stands for Recording End.
P-S : It stands for Playback Start.
P-E : It stands for Playback End.
S-S : It stands for Setup Start.
S-E : It stands for Setup End.
PWR : It indicates when the system was powered on.
USB : It indicates when the system saved data on the USB memory.
This button is used to backup data on USB memory.
HOW TO BACKUP DATA ON USB
" PLEASE WAIT...".
- 07 -