Camera - Clover CDR-4170 Instruction Manual

8.2 CAMERA

This product can be installed up to 4 cameras.
Connect cameras to the VIDEO IN (BNC) on the back panel of the product.
To connect a PTZ camera, connect the PTZ camera's control line to the RS-485 (+, -) terminal
and connect the video output to one out of VIDEO IN on the back panel of the product.
CAMERA (BNC)
VIDEO IN
CH1 CH2
LOOP OUT
A LOOP OUT is a looping output trough VIDEO IN. Therefore the monitor for
NOTE
looping output can be used only when there is video signal on the VIDEO IN.
V - OUT1 A - IN
CH3 CH4
V - OUT2 A - OUT
ALARM IN ALARM OUT
MODEL NO : CDR4170
AC100-240V,50/60Hz, 25W
_
1 2 3 4 GND +
CLOVER ELECTRONICS
RS485
13073 EAST 166TH STREET, CERRITOS, CA 90703
Factory ID/DHHS CODE : BC
ETHERNET
CAUTION
RISK OF ELECTRONIC SHOCK
DO NOT OPEN
- 42 -
PTZ CAMERA
ELECTRONICS U.S.A
R
C US LITED
E233232
AUDIO/VIDEO EQUIPMENT 2UW2
POWER
ATTENTION
RISQUE DE CHOC ELECTROIQUE
NE PAS ENLEVER
AC INPUT
AC100-240V,50/60Hz