Clover CDR-4170 Instruction Manual page 39

5.10.1.1 PASSWORD
•
Select the PASSWORD in the DVR ACCOUNT menu by using UP/DOWN buttons.
•
Select ON or OFF by using the ENTER button.
•
If ON is selected, the password has to be entered to get into the following mode.
Setup mode, Search mode, Record mode, Record stop mode, PTZ mode and System
Log mode.
•
The password must be 8 digits.
5.10.1.2 PASSWORD CHANGE
•
Select the PASSWORD CHANGE in the DVR ACCOUNT menu by using UP/DOWN
buttons.
•
Press the ENTER button and you will be requested to enter the current password as
below.
•
Enter the current password by using CH1 (number 1), CH2 (number 2), CH3 (number 3)
and CH4 (number 4) buttons. If the entered password is incorrect, user cannot create a
new password. If the password is correct, you will be requested to enter a new password
and to confirm as below.
•
Press the ENTER button to save the newly created password to the system.
5.10.2 NETWORK ACCOUNT SET
•
Select the NETWORK ACCOUNT SET in the ACCOUNT menu by using UP/DOWN
buttons.
- 34 -