Clover CDR-4170 Instruction Manual page 51

The following CONFIG screen will be shown.
•
Enter the IP/URL, Port number (default: 5700) and ID (default: admin), which must be
the same as for DVR.
NOTE:
■ If the registered Host Name is CLOVER11 at www.dyndns.org, enter
clover11.dyndns.org in IP/URL.
■ If the registered ID is CLOVER11 at www.cloverdvr.com, enter clover11.cloverdvr.com
in IP/URL.
■ Please pay attention to port forwarding (refer to section 5.5.6.5 PORT).
•
Select the video format depending on broadcasting system in your country (NTSC in
USA).
•
Click OK button.
•
Click the CONN button on the GUI and window comes up as below.
•
Enter the ID (default: admin) and the Password (default: admin), which must be the
same as for DVR.
NOTE Maximum 2 users can connect the DVR through the GUI at the same time.
- 46 -