Table of Contents
Advertisement
Quick Links
Product information presented
here reflects conditions at time
of publication. Consult factory
regarding discrepancies or
inconsistencies.
Register your
Zoeller Engineered Product
on our website:
http://reg.zoellerengprod.com/
EFFLUENT
6155, 6161, 6163, 6165
6185, 6186, 6188, 6189
Table of Contents
Safety Instructions .......................................................................... 1
Limited Warranty ............................................................................. 2
Preinstallation Checklist ................................................................. 2
Electrical Data ............................................................................... 3-4
General Information ......................................................................... 4
Pump Wiring Instructions ............................................................ 5-6
Operation .......................................................................................... 7
General Maintenance ....................................................................... 8
Service Checklist ............................................................................. 8
Owner's Information
Model Number: ______________
Simplex
Job Name: ____________________________________________
Distributor: ____________________________________________
Date of Purchase: _________ Zoeller S/O No.: ______________
Contractor: ____________________________________________
Date of Installation: _____________________________________
System Readings During Start-up: Voltage _____ Amps ______
MAIL TO: P.O. BOX 16347 • Louisville, KY 40256-0347
SHIP TO: 3649 Cane Run Road • Louisville, KY 40211-1961
(502) 778-2731 • 1 (800) 928-PUMP • FAX (502) 774-3624
OWNER'S MANUAL
Commercial Duty Pumps
Date Code: _______________
Duplex
© Copyright 2019 Zoeller
SEWAGE
6267, 6282, 6284
6292, 6293, 6294, 6295
6404, 6405
Safety Instructions
TO AVOID SERIOUS OR FATAL PERSONAL INJURY OR MAJOR
PROPERTY DAMAGE, READ AND FOLLOW ALL SAFETY
INSTRUCTIONS IN THIS MANUAL AND ON THE PUMP.
THIS MANUAL IS INTENDED TO ASSIST IN THE INSTALLATION AND
OPERATION OF THIS UNIT AND MUST BE KEPT WITH THE PUMP.
This is a SAFETY ALERT SYMBOL.
When you see this symbol on the pump or in
the manual, look for one of the following signal
words and be alert to the potential for personal
injury or property damage.
Warns of hazards that WILL cause serious
personal
damage.
Warns of hazards that CAN cause serious
personal injury, death or major property damage.
CAUTION
Warns of hazards that CAN cause personal injury
or property damage.
INDICATES SPECIAL INSTRUCTIONS WHICH
ARE VERY IMPORTANT AND MUST BE
FOLLOWED.
THOROUGHLY REVIEW ALL INSTRUCTIONS AND WARNINGS PRIOR
TO PERFORMING ANY WORK ON THIS PUMP.
MAINTAIN ALL SAFETY DECALS.
REFER TO WARRANTY ON PAGE 2.
Co. All rights reserved.
®
SECTION: Z1.20.145
Visit our website:
zoellerengineered.com
Tested to UL
Standard UL778. Certified
to CSA
Standard C22.2 No.108.
injury, death or major property
ZM2670
1119
Supersedes
0418
Advertisement
Table of Contents
Related Manuals for Zoeller 6155
Summary of Contents for Zoeller 6155
- Page 1 Job Name: ____________________________________________ THOROUGHLY REVIEW ALL INSTRUCTIONS AND WARNINGS PRIOR Distributor: ____________________________________________ TO PERFORMING ANY WORK ON THIS PUMP. Date of Purchase: _________ Zoeller S/O No.: ______________ MAINTAIN ALL SAFETY DECALS. Contractor: ____________________________________________ Date of Installation: _____________________________________ REFER TO WARRANTY ON PAGE 2.
- Page 2 Three phase pumps require motor starting devices with motor overload become damaged or the connection end were to fall into the sump. protection. Refer to ZM1342, Zoeller's simplex and duplex panel selection 2. Make sure the pump electrical supply circuit is equipped with fuses or circuit guide.
- Page 3 BA6282 1725 5.11 63.6/55.3 * Line to line reading will only reflect the run winding resistance. Start winding resistance can only be measured after removing the cover. CONTINUED ON NEXT PAGE © Copyright 2019 Zoeller Co. All rights reserved. ®...
- Page 4 0.0064 0.16 0.32 0.0040 0.10 0.20 (2) Install proper Zoeller unicheck (combination union and check valve), preferably just above 0.0025 0.06 0.13 the basin to allow easy removal of the pump for cleaning or repair. On sewage, effluent or 0.0016 0.04...
- Page 5 Always replace with new factory recommended oil and service parts. All warranty repairs must be made by Zoeller Authorized Service Stations. (5) On existing applications where the control panel only has one moisture sensor hookup per pump, one moisture sensor lead from the pump should be hooked to the moisture sensor lead in the panel, the other moisture sensor lead from the pump should be hooked to ground to complete the circuit.
- Page 6 The following should be noted. (1) A pump having the seal failure sensor option requires a panel set up to incorporate this feature. (2) All 3 phase pumps require overload protection in panel. © Copyright 2019 Zoeller Co. All rights reserved. ®...
- Page 7 OPERATION GENERAL • Pump power cables properly connected to panel Zoeller pumps are lubricated and tested at the factory prior • Float cables properly connected to panel to shipment and require minimum pre-start-up maintenance. • Conduit connections to panel are properly sealed Maximum operating temperature of pump liquid for standard •...
- Page 8 Every 5 years or 10,000 hours of operation: Pump is never to be lifted by power cord. • Remove pump, inspect and service using a Zoeller rebuild kit • Flush and clean basin Unit must be cleaned and disinfected, inside the DOUBLE SEAL PUMPS pumping chamber and all exterior surfaces, prior to servicing.
Need help?
Do you have a question about the 6155 and is the answer not in the manual?
Questions and answers