Table of Contents
Advertisement
7
Finishing
A. Facing Material
The fireplace structure can be covered with any
noncombustible material. Refer to Section 1.D.
WARNING! Risk of Fire! DO NOT apply
combustible materials beyond the minimum
clearances. Comply with all minimum clearances
to combustibles as specified in this manual.
Overlapping
materials
installation outside the scope as stated in this
manual please contact you authorized Hearth &
Home Technologies dealer prior to installation.
Figure 7.1. Minimum vertical and maximum horizontal mantel dimensions for combustible and non-combustible materials.
20
Outdoor Lifestyles by Hearth & Home Technologies Inc. • Lanai 48 See Thru Installation Manual • 4113-901 Rev. D • 8/21
could
ignite.
Any
12in.
305mm
8in.
203mm
6in.
152mm
2½in
63½mm
B
A
A
COMBUSTIBLE
18 IN
457 mm
NON-COMBUSTIBLE
0 IN
0 mm
Mantel and Wall Projections
WARNING! Risk of Fire! Comply with all minimum
clearances to combustible as specified. Framing or
finishing material closer than the minimums listed
must be constructed entirely of noncombustible
materials (i.e. steel studs, concrete board, etc.)
Figure 7.1 and 7.2 show the dimensions for
mantels or other combustible projections above
the appliance opening.
39 in. (990mm)
minimum to
ceiling
D
C
B
C
D
20 IN
22 IN
24 IN
508 mm
559 mm
610 mm
2 IN
4 IN
6 IN
51 mm
102 mm
152 mm
Firebox Opening
Advertisement
Table of Contents
