Table of Contents
Advertisement
8
Appliance setup
A. Remove the Shipping Materials
Remove the plastic coating and shipping materials
from the firebox.
WARNING! Risk of Fire! Close the ball valve
before installing the media template to prevent
accidental lighting. Remove the media template
before lighting the appliance.
B. Clean the Appliance
Clean/vacuum any sawdust that may have
accumulated inside the firebox.
C. Optional Accessories
Install approved accessories per instructions
included with accessories. Contact your dealer for
a list of approved accessories.
WARNING! Risk of Fire and Electric Shock! Use
ONLY Hearth & Home Technologies-approved
optional accessories with this appliance. Using
non-listed accessories could result in a safety
hazard and will void the warranty.
D. Verify Pilot Shield
Ensure proper placement of the pilot shield and
media placement template. See Figure 8.1.
Shipping could cause then to become displaced.
E. Install Deflection Glass
Deflection glass is stored just inside the firebox
under the media.
securing the deflection glass and packaging.
Carefully place deflection glass into support
bracket provided. See Figure 8.1.
F. Install Clear Crystal Media
Pour crystal media into the hearth area. Cover the
entire hearth pan area evenly, including burner
area and the pilot cover.
22
Outdoor Lifestyles by Hearth & Home Technologies Inc. • Lanai 48 See Thru Installation Manual • 4113-901 Rev. D • 8/21
Remove the two screws
Media placement
Template
Figure 8.1. Media Placement Template
G. Remove Media Placement Template
Remove screws attaching the media placement
template and remove. Do not discard template.
This must be used at any time media is applied
to unit.
Deflection Glass
Advertisement
Table of Contents
